VSC7111 11.5 Gbps Quad Signal Conditioner Mux/Demux Microsemis best-in-class equalizer delivers the industrys highest Highlights performance PCI Express (PCIe) re-driver. Up to 11.5 Gbps asynchronous operation VSC7111 is a high-performance, quad-channel asynchronous buffer Energy-ef cient Green modes that simpli es high-speed signal path designs (up to 11.5 Gbps) by Adaptive equalization providing Microsemis industry-proven signal equalization at both the inputs and outputs. The device optimizes energy ef ciency with Applications innovative Green modes that lower power consumption at lower data PCIe Gen 1/2 blade servers rates. Additional power savings can be achieved by deactivating 1.5G, 3G, and 6G SAS/SATA unused channels and con guring the best output level settings for an High-speed cable equalization application. The VSC7111 device offers programmable, static, and adaptive equalization settings to provide a comprehensive solution for countering signal degradation over a wide variety of transmission cabling and interconnect transmission paths in broadcast video, telecommunications, storage, and server applications. VSC7111 is fully compatible with the latest server, interconnect, and storage protocols including PCIe Gen 1/2/3, 10GBASE-KR, and SAS/ SATA. Loss of signal (LOS) detectors with programmable thresholds are included on every input port. Each channel includes PCIe Gen 1/2/3 receive detection and state machines. The VSC7111 can be con gured for pass-through 4-channel buffer, dual 2 2 matrix, dual 1:2 duocast, or dual 2:1 selector con gurations. VSC7111 Line Card and Central Switch Card Applications Backplane Line Card Switch Card Serial DC to Serial DC to 11.5 Gbps 11.5 Gbps ASIC or ASIC or 4 4 VSC7111 VSC7111 XFP VSC7111 VSC7111 XFP VSC7111 FPGA FPGA VSC7111 Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance speci cations are believed to be reliable but are not veri ed, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance speci cations or parameters provided by Microsemi. It is the Buyers responsibility to independently determine suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided as is, where is and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice.VSC7111 11.5 Gbps Quad Signal Conditioner Mux/Demux Flexible Architecture Key Speci cations 0 Gbps to 11.5 Gbps asynchronous operation 2.5 V power supply 4-channel buffer, dual 2 2 matrix, dual 1:2 duocast, or dual 180 mW typical power consumption per channel in full-power 2:1 selector con gurations mode, 140 mW per channel in Green mode 32-pin, 5 mm 5 mm QFN package Best-in-Class EQ Related Products Input EQ of 26 dB at 11.5 Gbps Transmit pre-emphasis with 15 output levels (maximum Visit www.microsemi.com for information about these related 1600 mV differential peak-to-peak) products: Input sensitivity 100 mV differential peak-to-peak Crosspoint Switches Ethernet Switches Ultra Low-Power Green Mode 0.71 W typical power consumption in full power mode (11.5Gbps) and 0.47 W typical power consumption in Green mode (6.5 Gbps) Storage and Server Protocols PCIe Gen 1/2/3 receive detection and state machines SAS/SATA-compatible loss of signal (LOS) detection and out- of-band (OOB) forwarding 2.5 V A0P Y0P EQ PE A0N Y0N Y1P A1P PE EQ Y1N A1N Channel 0 A2P Y2P EQ A2N PE Y2N Y3P A3P PE EQ Y3N A3N Channel 1 Two-Wire/Four-Wire Control Logic Static Control Serial Control Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for com- munications, defense and security, aerospace, and industrial markets. Products include high-performance and radiation- hardened analog mixed-signal integrated circuits, FPGAs, SoCs, and ASICs power management products timing and synchronization devices and precise time solutions voice processing devices RF solutions discrete components enter- prise storage and communications solutions, security technologies, and scalable anti-tamper products Ethernet solutions Power-over-Ethernet ICs and midspans custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, California, and has approximately 4,800 employees worldwide. Learn more at www.microsemi.com. Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100 20102016 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other trademarks Sales: +1 (949) 380-6136 and service marks are the property of their respective owners. Fax: +1 (949) 215-4996 VPPD-02629. 1.1. 4/16 email: sales.support microsemi.com www.microsemi.com