VSC8494 Quad Channel Universal 10G PHY with OTN/FEC and 1588v2/Y.1731 Microsemis multichannel universal 10G PHY with OTN/FEC device Highlights provides highly exible XAUI/SFI-4.2/TFI-5 to XFI transceiver capability Universal 10G PHY SerDes/CDR with optional OTN wrapper for 10 GbE, 8G/10G Fibre Channel, transceiver OC-192/STM-64, and OTU2 applications. Integrated transponder support and XFI/ SFI SerDes/CDR with redundant ports for The Microsemi VSC8494 quad Universal 10G PHYs with OTN-FEC protection switching are ideal for Carrier Ethernet switch/router and DWDM systems. 10 GbE LAN/WAN with SyncE and 1588v2 Cost-ef cient transponders based on the VSC8494 device cater to timestamp correction high volume 10 GbE/10G SONET/SDH and 8G/10G Fibre Channel. The VSC8494 device offers the ideal solution for multiport client and Integrated UPI/XAUI switch with G.709 OTN/FEC and GFP wrapper network interfaces on telecom transport linecards, transponders, and muxponders. Flexible 10 GbE XAUI/LAN/WAN mapping to OTU2 and overclocked OTU1e/2e This highly integrated device supports 10 GbE LAN Carrier Ethernet networks, as well as WAN and OTN networks, with an extensive suite Applications of 10 GbE mapping modes. With its 10G PHY XFI/SFI interfaces and N x 10G transponder/regenerator G.709 FEC features, the VSC8494 quad device provides a seamless Protected N x 10G muxponder/ROADM and direct interface to XFP and SFP+ optical modules. Transponder/muxponder pizza box The Microsemi VSC8494 quad device employs a bidirectional, independent channel architecture that can be used in both transponder Ethernet or IP/MPLS switches/routers (adaptation) and regenerator modes. Bidirectional performance MSPP/MSTP N x 10G line cards monitoring is supported in both cases. The OTN mapper with FEC supports performance monitoring and maintenance features de ned by the ITU-T G.709 standard, independent of the client signal carried, to simplify the operation of optical networks supporting various client signals. The VSC8494 quad device includes four 10 Gbps dual-mode bidirectional UPI client interfaces and four 10 Gbps bidirectional serial interfaces for direct connection to XFP or SFP+ optics modules or 10G serial backplanes. The Microsemi-de ned Universal PHY Interface (UPI) delivers 10 GbE and 10 GFC as four-lane XAUI, 10G SONET/SDH as four TFI-5-like serial lanes, and OTU2/ODU2 as four-lane SFI4.2-like interface. UPI also supports twice-rate XAUI (DDR XAUI or RXAUI) as two lanes operating at 6.25 Gbps, and twice-rate SFI-4.2 for OTU2/ODU2. Transponder/Regenerator (quad channel) Network Client: 4 2 SFP+ Module 2 10 GE LAN/WAN 4 VSC8494 10 GE LAN/WAN XFI 8GFC, 10GFC XFI 4 10G 8GFC, 10GFC SFI OC-192/STM-64 SFI OTN/FEC/PHY OC-192/STM-64 XFP Module OTU2/1e/2e OTU2/1e/2e Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance speci cations are believed to be reliable but are not veri ed, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance speci cations or parameters provided by Microsemi. It is the Buyers responsibility to independently determine suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided as is, where is and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice.VSC8494 Quad Channel Universal 10G PHY with OTN/FEC and 1588v2/Y.1731 Key Bene ts Key Speci cations Enables universal line cards supporting 10 GbE LAN/WAN, Universal PHY support: 10 GbE LAN/WAN, OC-192/ 8GFC, 10 GFC, OC-192/STM-64, and G.709 OTU2/1e/2e STM-64,10 GFC, OTU2/1e/2e 4-lane Lowest cost, power, and size for N x 10G line cards, as well as 10 GbE/10 GFC XAUI/RXAUI, SONET/SDH TFI-5-compatible, single-chip transponder/regenerator OTU2 SFI-4.2-compatible Direct connect to XFP and SFP+ client and network optics XFI/SFI SerDes/CDR with EDC, including multitap Tx Direct connect to high-speed backplanes, MACs, SONET/SDH pre-emphasis and adaptive DFE Rx and G.709 OTN framers, and FPGAs using four-lane serial Redundant XFI/SFI serial interfaces connect directly to client or interface compatible with XAUI/RXAUI (10 GbE, 10 GFC), TFI-5 network XFP/SFP+ optics (SONET/SDH) and SFI-4.2 (OTU2) 10G serial interfaces connect directly to 10GBASE-KR Wraps 10 GbE LAN/WAN, OC-192/STM-64, 8 GFC and backplanes 10GFC clients in G.709 OTU2 with either standard or en- OTN Mapper with RS(255,239) and G.975.1 eFECs hanced FEC 780-pin 29 mm 29 mm FCBGA May be con gured to accept any 10G serial client, monitor and As low as 2.5 W per channel typical power dissipation wrap it in G.709 OTN, and deliver it to UPI for connection to Related Products OTN switch, backplane, or other device Supports full-rate 10 GbE LAN transport using over-clocked Visit www.microsemi.com for information about these related OTU2e/1e (with or without xed stuff), as well as GFP-mapping products: with or without preamble and ordered set retention (G.709 and Ethernet MACs and switches for Ethernet L2 aggregation and G.Sup43) transport over 10 GbE LAN/WAN or OTN Supports 1+1 and 1:1 host interface protection switching EoS Mappers for Ethernet or multiservice aggregation and Supports loopbacks toward both client and network interfaces transport over SONET/SDH optionally mapped into OTU2 Asynchronous crosspoint switches 3/6G UPI 8-11G FEC OTN PCS MAC MAC PCS OTN FEC XFI 10-11G XFI CMU Reference Clock 3/6G UPI MAC PCS FEC OTN PCS MAC OTN FEC XFI 8-11G 10-11G XFI CPU Recovered clock OH add/drop Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for com- munications, defense and security, aerospace, and industrial markets. Products include high-performance and radiation- hardened analog mixed-signal integrated circuits, FPGAs, SoCs, and ASICs power management products timing and synchronization devices and precise time solutions voice processing devices RF solutions discrete components enter- prise storage and communications solutions, security technologies, and scalable anti-tamper products Ethernet solutions Power-over-Ethernet ICs and midspans custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, California, and has approximately 4,800 employees worldwide. Learn more at www.microsemi.com. Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100 20112016 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other trademarks Sales: +1 (949) 380-6136 and service marks are the property of their respective owners. Fax: +1 (949) 215-4996 VPPD-02755. 1.0. 4/16 email: sales.support microsemi.com www.microsemi.com