SLD36A-TP Micro Commercial Components (MCC)

SLD10(C)A THRU SLD60(C)A Features Automotive Protection Glass Passivated Chip Excellent Clamping Capability 6000Watts TVS Uni and Bidirectional Unit Halogen Free Available Upon Request By Adding Suffix-H 10 to 60 Volts Moisture Sensitivity Level 1 For Bidirectional Devices Add C To The Suffix of The Part Number: i.e.SLD10CA for 5% Tolerance Epoxy Meets UL 94 V-0 Flammability Rating Lead Free Finish/RoHS Compliant (Note1) Suffix Designates RoHS Compliant. See Ordering Information) R-6 Maximum Ratings 6000 W Peak Pulse Power Capability With a 10/1000 us waveform Repetitive Rate(duty cycle)0.01% Operating Junction Temperature Range: -55C to +175C Storage Temperature Range: -55C to +175C D Peak Pulse Power P Dissipation with a 6000W Note 2 PP 10/1000s Waveform Peak Pulse Power Dissipation with a P 2400W Note 2 PP 10/10000s Cathode Mark Waveform A Power Dissipation On P 8.0W T =75C D L Infinite Heatsink Peak forward surge current, 8.3 ms single I 500A Note 3 FSM B half sine-wave D unidirectional only Maximum instantaneous forward V 3.5V Note 3 F voltage at 100 A for unidirectional only Note: (1)High Temperature Solder Exemption Applied, see EU Directive Annex 7a. C (2)Non-repetitive current pulse per Fig.3 and derated above T = 25 C per Fig.4 A (3)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum DIMENSIONS Pin Configuration : INCHES MM DIM NOTE MIN MAX MIN MAX Cathode Anode A 0.340 0.360 8.60 9.10 Uni-directional B 0.340 0.360 8.60 9.10 Bi-directional C 0.048 0.052 1.20 1.32 D 1.000 ----- 25.40 ----- Rev.3-3-12012020 1/4 MCCSEMI.COMSLD10(C)A THRU SLD60(C)A Electrical Characteristics 25C Unless Otherwise Specified Maximum Maximum Maximum Working Peak MCC Reverse Reverse Clamping Breakdown Voltage V I BR T Reverse Voltage Part Number Leakage Surge Voltage V RWM I V Current I V I R RWM PP C PP (V) (A) (A) (V) I (mA) (Uni) (Bi) Min (V) Max (V) T SLD10A SLD10CA 11.80 13.0 5 10 10 350.0 17.0 SLD11A SLD11CA 12.20 13.5 5 10 11 327.0 18.2 SLD12A SLD12CA 13.30 14.7 5 10 12 300.0 19.9 SLD13A SLD13CA 14.40 15.9 5 10 13 277.0 21.5 SLD14A SLD14CA 15.60 17.2 5 10 14 257.0 23.2 SLD15A SLD15CA 16.70 18.5 5 10 15 245.0 24.4 SLD16A SLD16CA 17.80 19.7 5 10 16 229.0 26.0 SLD17A SLD17CA 18.90 20.9 5 10 17 216.0 27.6 SLD18A SLD18CA 20.00 22.1 5 10 18 204.0 29.2 SLD20A SLD20CA 22.20 24.5 5 10 20 184.0 32.4 SLD22A SLD22CA 24.40 26.9 5 10 22 168.0 35.5 SLD24A SLD24CA 25.00 30.0 5 10 24 153.0 38.9 SLD26A SLD26CA 28.90 31.9 5 10 26 142.0 42.1 SLD28A SLD28CA 31.10 34.4 5 10 28 131.0 45.4 SLD30A SLD30CA 33.30 36.8 5 10 30 123.0 48.4 SLD33A SLD33CA 36.70 40.6 5 10 33 112.0 53.3 SLD36A SLD36CA 40.00 44.2 5 10 36 103.0 58.1 SLD40A SLD40CA 44.40 49.1 5 10 40 92.5 64.5 SLD43A SLD43CA 49.00 54.2 5 10 43 86.00 69.4 SLD48A SLD48CA 53.30 58.9 5 10 48 77.00 77.4 SLD54A SLD54CA 60.00 66.3 5 10 54 68.50 87.1 SLD58A SLD58CA 64.40 71.2 5 10 58 64.00 93.6 SLD60A SLD60CA 68.40 75.6 5 10 60 61.50 96.8 Note: 1. Add suffix CA after part number to specify Bi-directional devices 2. For Bi-Directional devices having V of 10 volts and under, the I limit is double R R 3. Surge current waveform is defined at 10/1000us waveform Rev.3-3-12012020 2/4 MCCSEMI.COM