SMBj60A-TP Micro Commercial Components (MCC)

SMBJ5.0 THRU SMBJ440CA E480232 Features For Surface Mount Applicationsin Order to Optimize Board Space Low Inductance Fast Response Time: Typical Less than 1ps From 0V to V min BR 600 Watt TVS Halogen Free. Green Device (Note 1) Moisture Sensitivity Level 1 5.0 to 440 Volts Epoxy Meets UL 94 V-0 Flammability Rating Lead Free Finish/RoHS Compliant (Note 2) Suffix Designates RoHS Compliant. See Ordering Information) For Bidirectional Devices Add C To The Suffix of The Part Number: i.e.SMBJ5.0CA for 5% Tolerance Mechanical Data SMB (DO-214AA) Polarity: Color Band Denotes Positive end( cathode) Except (LEAD FRAME) Bi-directional Types Maximum Soldering Temperature:260C for 10 Seconds H Terminals: Solderable Per MIL-STD-750, Method 2026 Maximum Ratings J Operating Junction Temperature Range: -55C to +175C Cathode Mark Storage Temperature Range: -55C to +175C Thermal Resistance :20C/W Junction to Lead D A C Thermal Resistance :25C/W Junction to Case E Thermal Resistance : 100C/W Junction to Ambient B F G Electrical Characteristics 25C Unless Otherwise Specified Peak Pulse Power See the DIMENSIONS Surge Current on I Note 3 PP Table INCHES MM DIM NOTE 10/1000s Waveform MIN MAX MIN MAX A 0.079 0.103 2.00 2.62 Peak Pulse Power P B 0.075 0.087 1.91 2.21 600W Note 3,4,5 PP Dissipation C 0.002 0.008 0.05 0.20 D 0.006 0.012 0.15 0.31 Steady State Power Note 6 P E 0.030 0.060 0.76 1.52 5.0W M(AV) Dissipation F 0.065 0.091 1.65 2.32 G 0.200 0.220 5.08 5.59 8.3 ms Single Half H 0.160 0.191 4.06 4.85 Peak Forward I 100A Sine-Wave FSM J 0.130 0.155 3.30 3.94 Surge Current Unidirectional Only Suggested Solder Pad Layout NOTES: 1. Halogen freeGreeproducts are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 1.80mm 2. High Temperature Solder Exemption Applied, see EU Directive Annex 7a. 3. Non-repetitive current pulse, per Fig.3 and derated above T =25 C per Fig.4 A 2 4. Mounted on 5.0mm copper pads to each terminal. 5. Peak pulse current waveform is 10/1000us, with maximum duty Cycle of 0.01%. o 2.30mm 6. Power dissipation, on infinite heat sink at T =75 C L Pin Configuration : 2.50mm Cathode Anode Uni-directional Bi-directional Rev.3-7-12082021 1/8 MCCSEMI.COMSMBJ5.0 THRU SMBJ440CA Electrical Characteristics 25C Unless Otherwise Specified MAXIMUM REVERSE BREAKDOWN VOLTAGE REVERSE MAXIMUM PEAK PULSE STAND-OFF V I LEAKAGE CLAMPING CURRENT MCC (BR) T MARKING VOLTAGE V (VOLTS) VOLTAGE I I PART NUMBER PP PP WM CODE V WM I D VOLTS MIN MAX I (mA) VOLTS (AMPS) (A) T SMBJ5.0 5.0 6.40 7.30 10 9.6 62.5 800 KD SMBJ5.0A 5.0 6.40 7.00 10 9.2 65.2 800 KE SMBJ6.0 6.0 6.67 8.15 10 11.4 52.6 800 KF SMBJ6.0A 6.0 6.67 7.37 10 10.3 58.3 800 KG SMBJ6.5 6.5 7.22 8.82 10 12.3 48.7 500 KH SMBJ6.5A 6.5 7.22 7.98 10 11.2 53.6 500 KK SMBJ7.0 7.0 7.78 9.51 10 13.3 45.1 200 KL SMBJ7.0A 7.0 7.78 8.60 10 12.0 50.0 200 KM SMBJ7.5 7.5 8.33 10.2 1 14.3 42.0 100 KN SMBJ7.5A 7.5 8.33 9.21 1 12.9 46.5 100 KP SMBJ8.0 8.0 8.89 10.9 1 15.0 40.0 50 KQ SMBJ8.0A 8.0 8.89 9.83 1 13.6 44.1 50 KR SMBJ8.5 8.5 9.44 11.5 1 15.9 37.7 10 KS SMBJ8.5A 8.5 9.44 10.4 1 14.4 41.7 10 KT SMBJ9.0 9.0 10.0 12.2 1 16.9 35.5 5 KU SMBJ9.0A 9.0 10.0 11.1 1 15.4 39.0 5 KV SMBJ10 10 11.1 13.6 1 18.8 31.9 1 KW SMBJ10A 10 11.1 12.3 1 17.0 35.3 1 KX SMBJ11 11 12.2 14.9 1 20.1 29.9 1 KY SMBJ11A 11 12.2 13.5 1 18.2 33.0 1 KZ SMBJ12 12 13.3 16.3 1 22.0 27.3 1 LD SMBJ12A 12 13.3 14.7 1 19.9 30.2 1 LE SMBJ13 13 14.4 17.6 1 23.8 25.2 1 LF SMBJ13A 13 14.4 15.9 1 21.5 27.9 1 LG SMBJ14 14 15.6 19.1 1 25.8 23.3 1 LH SMBJ14A 14 15.6 17.2 1 23.2 25.8 1 LK SMBJ15 15 16.7 20.4 1 26.9 22.3 1 LL SMBJ15A 15 16.7 18.5 1 24.4 24.0 1 LM SMBJ16 16 17.8 21.8 1 28.8 20.8 1 LN SMBJ16A 16 17.8 19.7 1 26.0 23.1 1 LP SMBJ17 17 18.9 23.1 1 30.5 19.7 1 LQ SMBJ17A 17 18.9 20.9 1 27.6 21.7 1 LR SMBJ18 18 20.0 24.4 1 32.2 18.6 1 LS SMBJ18A 18 20.0 22.1 1 29.2 20.5 1 LT SMBJ20 20 22.2 27.1 1 35.8 16.7 1 LU SMBJ20A 20 22.2 24.5 1 32.4 18.5 1 LV SMBJ22 22 24.4 29.8 1 39.4 15.2 1 LW SMBJ22A 22 24.4 26.9 1 35.5 16.9 1 LX SMBJ24 24 26.7 32.6 1 43.0 14.0 1 LY SMBJ24A 24 26.7 29.5 1 38.9 15.4 1 LZ SMBJ26 26 28.9 35.3 1 46.6 12.4 1 MD SMBJ26A 26 28.9 31.9 1 42.1 14.2 1 ME SMBJ28 28 31.1 38.0 1 50.0 12.0 1 MF SMBJ28A 28 31.1 34.4 1 45.4 13.2 1 MG SMBJ30 30 33.3 40.7 1 53.5 11.2 1 MH SMBJ30A 30 33.3 36.8 1 48.4 12.4 1 MK For parts without A, the VBR is +10%. Rev.3-7-12082021 2/8 MCCSEMI.COM