CC4V-T1A Tuning Fork Crystal 30 kHz 1.0 MHz MICRO CRYSTAL SWITZERLAND DIMENSIONS Package: Recommended Solder Pad: 5,0 0,9 0,9 1,3 2,9 1,3 All dimensions in mm typical 100% leadfree, RoHS - compliant DESCRIPTION: Miniature SMT ceramic package This SMD ceramic package has been specially designed for miniature Package height 1.25 mm industrial, telecom and medical applications. SMD-package in Tape and Reel The crystals are supplied in special trays (100 crystals per tray). Ind. and Ext. temperature ranges For pick-and-place equipment, the parts are available in 12 mm tape: High stability 7 (178 mm) reel with 2000 crystals Low aging 13 (330 mm) reel with 10000 crystals Low power consumption High shock and vibration resistance ELECTRICAL CHARACTERISTICS o Frequency Range F 30200 201560 1 000 kHz AT 25 C: L 1) Load capacitance C 9.0 / 12.5 4.0 10.0 pF L F/F +/-30 +/-100 +/-100 ppm 2) Frequency tolerance F/F +/-100 +/-250 +/-500 ppm Drive level max. P 1.0 W Insulation resistance min. R 500 M i Aging rst year max. F/F +/-3 ppm 3) Frequency Example F 32.768 307.200 1000 kHz L Series resistance typ./max. R 50 / 65 3.5 / 5.0 0.5 / 1.2 k S Motional capacitance typ. C 2.1 1.1 1.1 fF 1 Static capacitance typ. C 1.2 1.2 1.0 pF 0 Turnover temperature T 25 +/-5 33 +/-5 39 +/-5 C 0 ppm 2 Frequency vs. temperature F/F 0.035 / (T - T ) +/-10% ppm 0 C 0 1) Other load capacitances on request. 2) Tighter and wider frequency tolerances on request. 3) Values for other frequencies consult factory. Version 5.0/03.2007 max.1,25 1,9 2,2STANDARD FREQUENCIES: Frequency Frequency kHz MHz 32.000 32.768 36.409 38.400 40.000 1.000 60.000 75.000 76.800 100.000 128.000 1.008 153.600 240.000 307.200 Other frequencies between 30 kHz and 1.008 MHz on request ENVIRONMENTAL Max. Conditions CHARACTERISTICS: Dev. Storage temp. range 55 to +125C Industrial operating temp. range 40 to +85C Extended operating temp. range 55 to +125C Shock resistance F/F 5000 g, 0.3 ms, sine +/-5 ppm Vibration resistance F/F 20 g / 102000 Hz +/-5 ppm TERMINATIONS AND Type Termination Processing PROCESSING: For SMD mounting Re ow soldering CC4V-T1A Au ashed pads 260C / 20 s max. PART NUMBER/ C C 4 V - T 1 A 32.768 kHz 9.0 pF +/-30 ppm ORDERING INFORMATION EXAMPLE: Frequency tolerance Crystal package Load capacitance C L C = Crystal in ceramic Frequency F package L Package lid Package pad form A = Pads on both ends C = Ceramic lid Pad plating Package size 4 = 5.0 x 1.9 x 1.25 mm 1 = Au ashed pads Package type Blank V = Tuning fork or T = For SMD mounting Length extension All specifications subject to change without notice. 03.07 Micro Crystal Div. of ETA SA Tel. +41 32 655 82 82 Mhlestrasse 14 Fax +41 32 655 82 83 CH-2540 Grenchen sales microcrystal.ch Switzerland www.microcrystal.com MICRO CRYSTAL SWITZERLAND Version 5.0/03.2007