M600 2.5-Inch NAND Flash SSD Features M600 2.5-Inch SATA NAND Flash SSD MTFDDAK128MBF, MTFDDAK256MBF, MTFDDAK512MBF, MTFDDAK1T0MBF Low power consumption Features 4 150mW TYP Micron 16nm MLC NAND Flash Endurance: Total bytes written (TBW) RoHS-compliant package Up to 400TB SATA 6 Gb/s interface Capacity (unformatted): 128GB, 256GB, 512GB, TCG/Opal 2.0-compliant self-encrypting drive 1024GB (SED) Mechanical Compatible with Microsoft eDrive SATA connector: 5V 10% Hardware-based AES-256 encryption engine 2.5-inch drive: 100.45mm x 69.85mm x 7.0mm ATA modes supported Weight: 65g (MAX) PIO mode 3, 4 Secure firmware update with digitally signed firm- Multiword DMA mode 0, 1, 2 ware image Ultra DMA mode 0, 1, 2, 3, 4, 5, 6 Operating temperature 5 Industry-standard, 512-byte sector size support Commercial (0C to +70C) Hot-plug/hot-remove capable 1. Typical I/O performance numbers as meas- Notes: Device sleep (DEVSLP), extreme low-power mode ured fresh-out-of-the-box (FOB) using Iome- Native command queuing support with 32-com- ter with a queue depth of 32 and write mand slot support cache enabled. ATA-8 ACS3 command set compliant 2. 4KB transfers used for READ/WRITE latency ATA security feature command set and password values. login support 3. The product achieves a mean time to failure Secure erase (data page) command set: fast and se- (MTTF) based on population statistics not cure erase relevant to individual units. Sanitize device feature set support 4. Active average power measured during exe- Self-monitoring, analysis, and reporting technology cution of MobileMark with DIPM (device- (SMART) command set initiated power management) enabled. Dynamic write acceleration 5. Temperature measured by SMART attribute Adaptive thermal monitoring 194. Power loss protection for data-at-rest Warranty: Contact your Micron sales representative 1, 2 Performance for further information regarding the product, PCMark Vantage (HDD test suite score): Up to including product warranties. 87,000 Sequential 128KB READ: Up to 560 MB/s Sequential 128KB WRITE: Up to 510 MB/s Random 4KB READ: Up to 100,000 IOPS Random 4KB WRITE: Up to 88,000 IOPS READ/WRITE latency: 120s/30s (TYP) Reliability 3 MTTF: 1.5 million device hours Static and dynamic wear leveling Uncorrectable bit error rate (UBER): <1 sector 15 per 10 bits read PDF: 09005aef858ae778 Micron Technology, Inc. reserves the right to change products or specifications without notice. 1 m600 2 5 ssd.pdf - Rev. C 9/14 EN 2014 Micron Technology, Inc. All rights reserved. Products and specifications discussed herein are subject to change by Micron without notice.M600 2.5-Inch NAND Flash SSD Features Part Numbering Information Microns M600 SSD is available in different configurations and densities. The chart below is a comprehensive list of options for the M600 series devices not all options listed can be combined to define an offered product. Visit www.micron.com for a list of valid part numbers. Figure 1: Part Number Chart MT FD D AK 128 M BF - 1 AN 1 2 AB YY ES Micron Technology Production Status Blank = Production Product Family ES = Engineering sample FD = Flash drive MS = Mechanical sample Drive Interface Customer Designator D = SATA 6.0 Gb/s YY = Standard Drive Form Factor Feature Set AK = 2.5-inch (7mm) AA = Contact factory AT = mSATA AB = Standard AV = M.2 (80mm x 22mm 3.5mm) AC = Contact factory AY = M.2 (60mm x 22mm 3.5mm) ZZ = Blank Extended Firmware Features Drive Density Z = Non-Encrypted 064 = 64GB 1 = Contact factory 128 = 128GB 2 = SED (self-encrypting drive) 256 = 256GB 512 = 512GB Sector Size 1T0 = 1024GB 1 = 512 byte NAND Flash Type NAND Flash Component M = MLC AN = 128Gb, MLC, x8, 3.3V (16nm) Product Family BOM Revision BF = M600 For example: 1 = 1st generation 2 = 2nd generation PDF: 09005aef858ae778 Micron Technology, Inc. reserves the right to change products or specifications without notice. 2 m600 2 5 ssd.pdf - Rev. C 9/14 EN 2014 Micron Technology, Inc. All rights reserved.