5200 Series NAND Flash SSD
Features
5200 Series SATA NAND Flash SSD
MTFDDAK240T, MTFDDAK480T, MTFDDAK960T, MTFDDAK1T9T,
MTFDDAK3T8T, MTFDDAK7T6T
Reliability
Features
3
MTTF: 3.0 million device hours
Micron 3D TLC NAND Flash
Static and dynamic wear leveling
Three performance/endurance levels
Uncorrectable bit error rate (UBER): <1 sector
17
ECO
per 10 bits read
PRO
End-to-end data protection
MAX
Enhanced power-loss data protection with data
TCG Enterprise compliant self-encrypting drive
protection capacitor monitoring
(SED)
Self-monitoring, analysis, and reporting technology
SATA 6 Gb/s interface
(SMART) command set
4
ATA modes supported
Capacity (unformatted): 240GB, 480GB, 960GB,
PIO mode 3, 4
1920GB, 3840GB, 7680GB
Multiword DMA mode 0, 1, 2
Mechanical:
Ultra DMA mode 0, 1, 2, 3, 4, 5, 6
2.5-inch x 7.0mm form factor
512-byte sector size support
RoHS-compliant package
Hot-plug capable
Secure field-upgradeable firmware with digitally
Native command queuing support with 32-com-
signed firmware image
mand slot support
Power consumption: <6.0W (TYP, 5V only)
ATA-8 ACS-3 revision 5 command set compliant
Operating temperature
5
ATA security feature command set and password
Commercial (0C to 70C)
login support
1. Performance varies by capacity and endur-
Notes:
Security erase command set: fast and secure erase
ance.
1
Performance (steady state)
2. 4KB transfers QD = 1 used for READ/WRITE
Sequential 128KB read: Up to 540 MB/s
latency values.
Sequential 128KB write: Up to 520 MB/s
3. The product achieves a MTTF based on pop-
Random 4KB read: Up to 95,000 IOPS
ulation statistics not relevant to individual
Random 4KB write: Up to 75,000 IOPS
units.
2
Quality of Service
4. 1GB = 1 billion bytes.
Read/Write (99.9%): 200s/300s (<2TB)
5. As reported by SMART.
Read/Write (99.999%): 1000s/700s (<2TB)
4
Warranty: Contact your Micron sales representative
Endurance : Total bytes written (TBW)
for further information regarding the product,
Up to 17600TB
including product warranties.
CCMTD-731836775-10503 Micron Technology, Inc. reserves the right to change products or specifications without notice.
1
5200_series_ssd.pdf - Rev. E 05/18 EN 2017 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.5200 Series NAND Flash SSD
Features
Part Numbering Information
Microns 5200 SSD is available in different configurations and densities. The chart below is a comprehensive list of
options for the 5200 series devices; not all options listed can be combined to define an offered product. Visit mi-
cron.com for a list of valid part numbers.
Figure 1: Part Number Chart
MT FD D AK 960 T DC - 1 AT 1 6 AB YY ES
Production Status
Micron Technology
Blank = Production
ES = Engineering sample
Product Family
FD = Flash drive
Customer Designator
YY = Standard
Drive Interface
D = SATA 6.0 Gb/s
Hardware Features
AB = Standard
Drive Form Factor
TA = TAA Compliant
AK = 2.5-inch (7mm)
Drive Capacity Extended Firmware Features
240 = 240GB Z = None
480 = 480GB
6 = SED TCG eSSC
960 = 960GB
1T9 = 1920GB
Sector Size
3T8 = 3840GB
1 = 512 byte
7T6 = 7680GB
NAND Flash Component
NAND Flash Type
AT = 512Gb, TLC, x8, 3.3V (3D)
T = TLC
BOM Revision
Product Family
For example:
DC = 5200 ECO
1 = 1st generation
DD = 5200 PRO
2 = 2nd generation
DN = 5200 MAX
CCMTD-731836775-10503 Micron Technology, Inc. reserves the right to change products or specifications without notice.
2
5200_series_ssd.pdf - Rev. E 05/18 EN 2017 Micron Technology, Inc. All rights reserved.