66095 MINIATURE LCC OPTOCOUPLER
OPTOELECTRONIC PRODUCTS
DIVISION
08/14/2008
Features: Applications:
Electrically similar to 4N47, 4N48, or 4N49 High density surface mount circuits
Standard and screened versions available Ground loop isolation
Hermetically sealed 4 pin LCC Feedback controls
High-voltage electrical isolation1 kV rating General purpose switching circuits
DESCRIPTION
The 66095 series optocouplers consist of an infrared LED and a silicon phototransistor in a 4 pin hermetically sealed
leadless chip carrier. The 66095 is electrically similar to the 4N47, 4N48, or 4N49 series optocouplers, and is available in
standard and screened versions. The 66095 miniature LCC is ideal for surface mount applications where board space is
limited.
ABSOLUTE MAXIMUM RATINGS
Input-to-Output Voltage ...................................................................................................................................................... 1 KV
Collector-Emitter Voltage ....................................................................................................................................................... 40 V
Input Diode Reverse Voltage ................................................................................................................................................... 2 V
C Free-Air Temperature Note 1.40 mA
Input Diode Continuous Forward Current at (or below) 65
Continuous Collector Current ............................................................................................................................................ 50 mA
Peak Diode Current..( tw < 1 s, PRR < 300 pps) ................................................................................................................. 1A
Continuous Transistor Power Dissipation at (or below) 25C Free-Air Temperature Note 2 ....................................... 300 mW
Operating and Storage Free-Air Temperature Range ....................................................................................... -55C to +125C
Lead Temperature (10 seconds max) ................................................................................................................................ 245C
Note 1: Derate linearly to 125C free-air temperature at the rate of 0.67 mA/C
Note 2: Derate linearly to 125C free-air temperature at the rate of 3 mW/C
Package Dimensions Schematic Diagram
0.225 [5.72]
0.075 [1.91]
0.215 [5.46] 0.061 [1.55]
0.155 [3.94]
PIN 1
0.145 [3.68]
IDENTIFIER COLLECTOR 1 2 CATHODE
0.048 [1.22]
3 PLCS
0.032 [0.81]
0.028 [0.71]
2
1
0.022 [0.56]
EMITTER 4 3 ANODE
3 0.052 [1.32]
4
0.048 [1.22]
0.088 [2.24]
0.072 [1.83]
ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E.Walnut St., Garland, TX 75040 (972)272-3571 Fax (972)487-6918
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM
66095 MINIATURE LCC OPTOCOUPLER
08/14/2008
ELECTRICAL CHARACTERISTICS
T = 25C unless otherwise specified.
A
PARAMETER SYMBOL MIN TYP MAX UNITSTEST CONDITIONS NOTE
Input Diode Static Reverse Current I
R
100 nA V = 2 V
R
Input Diode Static Forward Voltage -55C V 1.0 1.7 V
F
+25C 0.8 1.4 1.5 V I = 10 mA
F
+100C 0.7 1.3 V
OUTPUT TRANSISTOR T = 25C unless otherwise specified.
A
Collector-Emitter Breakdown Voltage V
(BR)CEO
40 V I = 1 mA, I = 0, I = 0
C B F
Emitter-Collector Breakdown Voltage V 7 V I = 0, I = 100 A, I = 0
(BR)ECO B E F
COUPLED CHARACTERISTICS T = 25C unless otherwise specified.
A
On State Collector Current -X01 0.5 -
T = +25C -X02 I 1.0 5 V = 5 V, I = 0, I = 1 mA
a
C(ON) CE B F
mA
-X03 2.0 10
On State Collector Current -X01 0.7
T = -55C -X02 I 1.4 V = 5 V, I = 0, I = 2 mA
a
C(ON) CE B F
mA
-X03 2.8
On State Collector Current -X01 0.5
T = +100C -X02 I 1.0 V = 5 V, I = 0, I = 2 mA 2
a C(ON) CE B F
mA
-X03 2.0
Off State Collector Current I V = 20 V, I = 0,
C(OFF) CE B
100 nA
+25C I = 0 mA
F
Off State Collector Current, + 100C I
C(OFF)
100 A V = 20 V, I = 0, I = 0 mA
CE B F
Collector-Emitter Saturation Voltage -X01 V
0.3 = 2 mA, I = 0, I =0.5 mA
CE(SAT) V I
F B C
-X02 V
0.3 I = 2 mA, I = 0, I = 1 mA
CE(SAT) V
F B C
-X03 V
0.3 I = 2 mA, I = 0, I = 2 mA
CE(SAT) V
F B C
Input to Output Resistance R 11 1
IO
10 V = 1 kV
IN-OUT
Input to Output Capacitance C 1
IO
5 pF F = 1 MHz, V = 1 kV
IN-OUT
Rise Time (Phototransistor Operation) -X01 t 20
r
V = 10 V, I = 10 mA,
CC F
or -X02 or 25
s R = 100
L
Fall Time -X03 t 25
f
NOTES:
1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together.
2. This parameter must be measured using pulse techniques. t = 100 s, duty cycle 1%.
w
RECOMMENDED OPERATING CONDITIONS:
PARAMETER SYMBOL MIN MAX UNITS
Input Current, Low Level I 0 100 A
FL
Input Current, High Level I 2 10 mA
FH
Supply Voltage V 5 35 V
CC
Operating Temperature T -55 125 C
A
SELECTION GUIDE
PART NUMBER PART DESCRIPTION
66095-001 4N47 Optocoupler Commercial
66095-002 4N48 Optocoupler, Commercial
66095-003 4N49 Optocoupler, Commercial
66095-101 4N47 Optocoupler, Screened
66095-102 4N48 Optocoupler, Screened
66095-103 4N49 Optocoupler, Screened
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E.Walnut St., Garland, TX 75040 (972)272-3571 Fax (972)487-6918
www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM