WXP INTERFERENCE SUPPRESSION CAPACITORS OF CLASS X2 / 300VAC WXP version 00, 01 Taped L B L B L B A Cu wire - tinned 0,1 0,1 0,8 0,1 a 0,8 0,8 T/2 0,6 A Lead spacing of 15.0 mm Lead spacing of 15.0 mm crimped the pitch of holes on carrier tape to the lead spacing of 7.5 mm 12.7 mm the pitch of holes on carrier tape 15.0 mm WXP version 02,03 L B Standard lead lengths 1 X = 6 mm for version 00 5 X = 35 mm for version 01 02 03 0,1 version 02 - Cu wire 0.8 mm, PCV insulated 2 version 03 - stranded wire 0.5 mm , PCV insulated Stripped ends of leads covered by tin APPLICATION The WXP interference suppression capacitors of class X2 are designed to attenuate RFI signals in electronic / electrical equipment supplied with AC voltage value not exceeding the rated voltage with frequency 50/60 Hz. CONSTRUCTION Non-inductive metallized polypropylene winding encapsulated in self-extinguishing material meeting the requirements of UL 94 V-0. REQUIREMENTS The WXP capacitors meet the requirements of EN 60384-14 standard for class X2. ZAK ADY PODZESPOW RADIOWYCH page 1 99-300 KUTNO, UL. GRUNWALDZKA 3, POLAND pages 2 Tel.: (48) (24) 355 11 0002 Fax: (48) (24) 355 11 88 E-mail: miflex miflex.com.pl Revision date: 06.02.2008 Marking Marking area area 2 7 X H X H H H H 1WXP INTERFERENCE SUPPRESSION CAPACITORS OF CLASS X2 / 300VAC TECHNICAL DATA Rated voltage 300 Vac 50/60 Hz Dissipation factor 0.0010 at f = 1 kHz for C > 1.0 F R 0.0010 at f = 10 kHz for C 0.1 F R 0.0050 at f = 10 kHz for 0.1 F < C 1.0 F R Insulation resistance 30 000 M for C 0.33 F R 10 000 M x F for C > 0.33 F R Production voltage test The 100 % screening factory test is carried out at 2150 VDC per 1 sec. All electrical characteristics are checked after the test. Voltage change rate du/dt 100 V/s Climatic category 40/100/56/C Standard WT-04/MIFLEX/WXP Safety approvals Dimensions Code 0,3 0,3 H 0,3 1 L H B a max EN 60384-14 F VAC mm mm mm mm mm WXP-103 0,010 WXP-153 0,015 10,5 12,5 5,5 0,022 WXP-223 0.5 0,033 18,0 15,0 WXP-333 WXP-473 0,047 12,5 14,5 6,5 WXP-683 0,068 13,5 15,5 7,5 WXP-104 0,10 14,5 16,5 8,5 0,15 300 15,5 7,5 WXP-154 0.7 WXP-224 0,22 26,5 16,5 8,5 22,5 WXP-334 0,33 18,5 10,5 0,47 20,5 11,5 WXP-474 0.7 0,68 31,5 23,5 13,5 27,5 WXP-684 WXP-105 1,0 24,5 15,0 WXP-155 1,5 28,5 16,0 0.7 41,5 37,5 2,2 33,0 18,0 WXP-225 Capacitance tolerance: Approvals in use = K = 10 % M = 20 % ZAK ADY PODZESPOW RADIOWYCH page 2 99-300 KUTNO, UL. GRUNWALDZKA 3, POLAND pages 2 Tel.: (48) (24) 355 11 0002 Fax: (48) (24) 355 11 88 E-mail: miflex miflex.com.pl Revision date: 06.02.2008 00 01 02 03 Version Rated capacitance Rated voltage