MICROSD CLICK MikroElektronika

2. Soldering the headers Before using your click board, make sure to solder the provided 1x8 male headers to both sides of the board. Two 1x8 male headers are included with the board in the package. 1 microSD click 2 3 1. Introduction 4. Using microSD Cards Turn the board upside down, so that Turn the board upward again. Make sure Board contains the slot for standard bottom side is facing you upwards. Place to align the headers so that they are microSD cards. Once power is turned on, shorter parts of the header pins in the perpendicular to the board, then solder the power LED will indicate that board is in Front and back side appearance both soldering pad locations. pins carefully. operation. Data is read and written to the of the microSD click Board card using industry standard SPI interface. Need more additional memory Weve got just the thing for you. microSD Click is an 3. Plugging the board in accessory board in mikroBus form factor. It click features a microSD card slot for microSD cards Once you have soldered the headers your used as a mass storage media for portable board is ready to be placed into desired BOARD devices. Industry standard SPI interface mikroBUS socket. Make sure to align the www.mikroe.com ensures simple communication at high data cut in the lower-right part of the board rates. Use it for reading or storing data like with the markings on the silkscreen at the microSD click Manual music, text lfi es, videos and more. Board is mikroBUS socket. If all the pins are aligned ver. 1.00 designed to use 3.3V power supply only. correctly, push the board all the way On board ferrite voltage supply lfi ter ensures into the socket. 0 100000 019979 stable operation.6. Power supply - 3.3V only 5. microSD click Board Schematics Board is designed to use 3.3V power supply only. If you need to add MMC/SD feature to your 5V prototype or development board, we recommend you to use other boards such as the MMC/SD Accessory Board: