MIKROE-1133 MikroElektronika

2. Soldering the headers Before using your click board, make sure to solder the provided 1x8 male headers to both sides of the board. Two 1x8 male headers are included with the board in the package. 1 L10 GPS click 2 3 1. Introduction 4. Features and applications GPS Click - L10 board with its Quectel L10 module supports 210 PRN channels, with 66 search channels and 22 simultaneous tracking channels. It has low tracking power consumption of 38mA, 4Mbit flash memory, Turn the board upside down, so that Turn the board upward again. Make sure superior anti-jamming design, and up to 5Hz bottom side is facing you upwards. Place to align the headers so that they are update rate. Its ease of integration results shorter parts of the header pins in both perpendicular to the board, then solder the in fast time-to-market in a wide range soldering pad locations. pins carefully. of automotive, consumer and industrial applications. GPS Click - L10 is an accessory board in 3. Plugging the board in mikroBus form factor. Its a compact solution click for adding GPS functionality to your device. It Once you have soldered the headers your features Quectel L10, high performance board is ready to be placed into desired BOARD MTK positioning engine. GPS Click - L10 mikroBUS socket. Make sure to align the www.mikroe.com communicates with target board through cut in the lower-right part of the board 2 UART or I C interface. Data can be acquired with the markings on the silkscreen at the GPS click L10 Manual using PC application through USB connection. mikroBUS socket. If all of pins are aligned ver. 1.00 Board features connector compatible with correctly, push the board all the way active and passive antennas. It can operate on into the socket. 3.3V power supply only. 0 100000 0198496. Power supply - 3.3V only 5. GPS click L10 Board Schematics Board is designed to use 3.3V power supply only. If you need to add GPS feature to your 5V prototype or development board, we recommend you VCC to use other boards such as the SmartGPS GPS1 R3 220 SDA2 1 28 TIMEPULSE Accessory Board: SDA2 TIMEPULSE SCL2 2 27 SCL2 EXTINT0 USB DP TxD1 3 26 TIME PULSE TXD1 USB DP