Wireless connectivity Skip steps and instantly get ahead with your hardware projects with click boards. Hundreds of standardized add-on boards with all kinds of sensors and transceivers are available. No soldering, no wires, no time-wasting. Just pick a click, plug it into a compatible socket or breadboard, and start building your prototype. Key features Standardized size, shape and connector Compatible with all popular platforms Software examples and libraries included Hundreds of boards available You are seeing just a small selection here. Display See them all at www.mikroe.com/click mikroBUS standard PWM - PWM output Analog - AN INT - Hardware Interrupt Reset - RST RX - UART Receive SPI Chip Select - CS TX - UART Transmit SPI Clock - SCK 2 SCL - I C Clock SPI Master Input Slave Output - MISO 2 SDA - I C Data SPI Master Output Slave Input - MOSI +5V - VCC-5V power VCC-3.3V power - +3.3V GND - Reference Ground Reference Ground - GND Audio and Voice click boards are made in accordance with mikroBUS a standard that denes their size, shape, 16-pin connector and corresponding mainboard socket. It is an open standard. Independent developers can implement mikroBUS sockets on their own boards to take full advantage of click boards . Storage To learn more, visit: www.mikroe.com/mikrobus Interface