MAXIMUM SOLUTIONS New Receptacle from Mill-Max Off ers Early Engagement Mill-Max is pleased to announce a new option in our receptacle line-up with the introduction of re- ceptacles characterized by an early engagement contact point. The new 0507-0-15-XX-31-27-10-0 receptacle provides an early engagement contact point, minimal overall length and accepts lead diameters from .018 - .023 (0,46mm). The minimum mating lead length for reliable electrical contact is .054 (1,37mm). The internal contact allows for short receptacle designs due to its .062 (1,57mm) length and the fact its design does not require excess protrusion through the fi ngers of the contact for electrical connection. The ability to use shorter mating pins provides several advantages such as compressed packaging, shorter electrical signal paths and lower potential RF signal interference. The 0507 is a solder mount receptacle with a .020 (0,51mm), low profi le height above the board. The contact enables us to keep the total length to .090 (2,29mm) making it advantageous for satisfying tight packaging constraints. The receptacle shell is made from brass alloy and, like all Mill-Max pins, are high-speed machined to precision tolerances. The contact is press-fi t into each receptacle shell forming a gas-tight connec- tion. It is a four fi nger contact, precision stamped from beryllium copper strip and heat treated to provide excellent spring and electrical properties. The receptacle current rating is 3 Amps ( 10C temp. rise in free air). The receptacle shell and contact are gold-plated providing the highest inter- connect reliability, corrosion protection and wear resistance. Tin and tin/lead plating options are also available upon request. For more information, please visit: www.mill-max.com/PR646. (6/14 -- PR646) Mill-Max Mfg. Corp. 190 Pine Hollow Road, Oyster Bay, NY 11771 516-922-6000 Fax: 516-922-9253 www.mill-max.comPIN RECEPTACLES FOR .018 - .023 DIAMETER PINS 0507 0531 0531-0-15-XX-31-XX-10-0 0507-0-15-XX-31-XX-10-0 Hex press-fit in .045 plated through-hole Solder mount in .042 min. mounting hole (Top or Bottom entry capable) .020 .052 DIA038 DIA066 .068 .020 .066 .073 .039 DIA090 .031 DIA. HOLE .048 DIA. ORDER CODE: 05XX - 0 - 15 - XX - 31 - XX - 10 - 0 SPECIFICATIONS: BASIC PART Shell Material: Brass Alloy 360, 1/2 Hard SPECIFY CONTACT FINISH: SPECIFY SHELL FINISH: Contact Material: Beryllium Copper Alloy 172, HT 01 200 P TIN/LEAD OVER NICKEL 01 200 P TIN/LEAD OVER NICKEL Dimensions: Inches 80 200 P TIN OVER NICKEL (RoHS) 80 200 P TIN OVER NICKEL (RoHS) 15 10 P GOLD OVER NICKEL (RoHS) 27 30 P GOLD OVER NICKEL (RoHS) Tolerances On: Lengths: .005 SELECT CONTACT: Diameters: .002 RoHS - 2 2011/65/EU 31 CONTACT Angles: 2 (For alternate contact choices, see group A on page 248) PAGE 171.1 PIN RECEPTACLES