MAXIMUM SOLUTIONS Multi-Purpose Terminal: Solderless Press-fi t/Wire Termination/Board Edge Mount Mill-Max introduces a new terminal pin suitable for use in a variety of board-to-board and wire-to-board ap- plications. It features a compliant press-fi t tail, slotted head and an additional press-fi t feature on the barrel of the pin. These characteristics combine to provide functional, versatile and reliable connection options. The new 3622-0-32-15-00-00-03-0 pin is designed to be a versatile solution for some popular interconnect confi gurations. The pins can be used individually or they can be packaged in customer specifi ed connector arrangements. The solderless press-fi t tail allows the pins to be staked into printed circuit board holes and then have soldering operations performed on the slotted end of the pin without compromising the connec- tion to the board. The compliant press-fi t tail is designed to work with standard .040 (1,02 mm) +/- .003 (,0762 mm) plated-through-holes and will provide a gas tight connection. The 3622 can be used as an edge board mount pin by fi tting the board into the slotted end of the pin this facilitates right angle board-to-board mating such as daughter card to mother board. When used for board edge connections, the printed circuit board is slipped into the slot and soldered this may be done before or after the compliant tails are pressed into the adjoining board. The slot will accept board thicknesses up to .062 (1,57 mm)*. The 3622 can also be used for wire-to-board applications where a permanent termina- tion of wires, for power or signal transmission, is required. Once the pin is pressed into the board, the wire can be placed into the slot and soldered. Since there is no soldering operation required to make the secure electrical connection to the board, there is no concern about compromising this connection during the soldering of wires. The slot will accept up to 16 AWG stranded wire. The 3622 slotted, compliant tail terminal is a versatile, robust and convenient solution for board-to-board and wire-to-board interconnect applications. Like all Mill-Max pins, the 3622 is precision-machined to the highest quality and consistency. It is available with standard 10 micro inches gold plating (thicker gold plat- ing available upon request). * The machining process produces an arc through the slot. When using multiple pins in line, the slots need to be uniformly oriented to maximize usable slot width. For more information, please visit: www.mill-max.com/PR655. (6/15-- PR655) Mill-Max Mfg. Corp. 190 Pine Hollow Road, Oyster Bay, NY 11771 516-922-6000 Fax: 516-922-9253 www.mill-max.comMALE PCB PINS SOLDER TERMINALS SLOTTED 2715 2809 2715-X-01-XX-00-00-07-0 2809-X-01-XX-00-00-07-0 Swage mount in .116 hole Swage mount in .116 hole Basic Board Basic Part Board Length Part Thick- Length Depth Number Thickness V Number ness V D .032 2715-2 .062 .109 2809-1 .031 .078 .068 .156 DIA187 2715-3 .094 .141 2809-2 .062 .109 .098 .344 .125 DIA125 .172 2809-3 .094 .141 .098 2715-4 .062 .062 2809-4 .125 .172 .098 .108 DIA113 DIA. V KNURL .070 DIA. HOLE 2701 2808 2762 2762-4-01-XX-00-00-07-0 2701-X-01-XX-00-00-07-0 2808-X-01-XX-00-00-07-0 Swage mount in .116 hole Swage mount in .116 hole Swage mount in .116 hole For a .125 thick board Basic Part Board Length .040 SLOT .050 Number Thickness V .140 DIA048 .031 .063 SLOT .065 .172 2XXX-1 .031 .075 .065 .109 DIA328 2XXX-2 .062 .105 .156 DIA203 .187 .141 DIA156 DIA312 .094 .135 2XXX-3 .344 .188 DIA062 .125 DIA062 KNURL .125 .165 KNURL 2XXX-4 .062 .112 DIA. V .112 DIA113 DIA. V .171 KNURL .096 .070 DIA081 DIA070 DIA. HOLE HOLE HOLE 2807 3622 3622-0-32-15-00-00-03-0 2807-X-01-XX-00-00-07-0 Slotted compliant tail press-fit in .040 .003 Swage mount in .116 hole plated hole. For .060 J .100 thick board Basic Part Board Length .154 DIA018 Number Thickness V A .051 SLOT 45 .078 SLOT 2807-1 .031 .078 .070 SLOT 2807-2 .062 .109 .203 .188 DIA010 .328 2807-3 .094 .140 .010 .042 .125 .171 2807-4 KNURL When multiple pins are .018 .042 used for board edge .112 DIA. V .120 .108 mount applications, the .070 slots must be .156 .124 .079 DIA. aligned uniformly376 HOLE ORDER CODE: XXXX - X - XX - XX - 00 - 00 - 07 - 0 SPECIFICATIONS: Pin Material: Brass Alloy 360, 1/2 Hard ( Swage pins are annealed ) BASIC PART SPECIFY PIN FINISH: 01 200 P TIN/LEAD OVER NICKEL Dimensions: Inches 15 10 P GOLD OVER NICKEL (RoHS) Part 3622 plating ONLY Tolerances On: Lengths: .005 80 200 P TIN OVER NICKEL (RoHS) Diameters: .002 44 300 P SILVER OVER COPPER (RoHS) RoHS - 2 2011/65/EU Angles: 2 50 300 P ELECTRO-SOLDER (60/40 SnPb) Y 0 P ZTUF 0 1 X 3PBE JOF )PMMP t 1 PSQ . JMM .BY .GH NJMM N BY t X X X /: t t S BZ PN BY D .072 DIA059 DIA038 DIA045 DIA026 DIA. HOLE PAGE 243 MALE PCB PINS