123456 78 (Description) (Performance Curve) 60Hz 50Hz (Items) (Rating) 140 3500 2 A (Motor Type) (2P Single Ph. Shaded Pole Induction Motor) 120120 3000 3000 (Duty) (Continuous) A0 A1 B0 B2 B3 B4 (Voltage Class) 100 2500 V 1 100 115 200 220 230 240 (Rating Voltage) SpeedSpeedCurveCurve Hz 5050 6060 5050 6060 5050 6060 5050 6060 5050 6060 5050 6060 (Frequency) 80 80 2000 2000 V B 65 65 130 145 175 140 (Starting Voltage) -1 min 25 60 1500 2600 2900 2600 2900 2600 2900 2600 2900 2600 2900 2600 2900 (Speed Minimum) A 25 0.270 0.230 0.250 0.210 0.140 0.120 0.120 0.100 0.120 0.100 0.110 0.100 (Current Maximum) 40 40 1000 1000 +10%+10% W 25 20%20% 15.0 14.0 15.5 14.5 15.0 13.0 14.0 13.0 15.0 14.0 14.0 13.0 PQCurve (Input Power Average) 3 m /min 35 2.50 2.90 2.50 2.90 2.50 2.90 2.50 2.90 2.50 2.90 2.50 2.90 20 500 (Max Air Flow Minimum) Pa 45 C 64.7 76.4 64.7 76.4 64.7 76.5 63.8 75.6 63.8 70.7 63.8 65.7 (Max Static Pressure Minimum) A 5 0 0 0 0 00.370370 00.300300 00.320320 00.270270 00.190190 00.170170 00.160160 00.140140 00.160160 00.140140 00.140140 00.120120 0.0 0.0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.0 3.5 3.5 (Locked Rotor Current Maximum) 33 Q mQ /min /i dB 256 37.0 41.0 37.0 41.0 37.0 41.0 37.0 41.0 37.0 41.0 37.0 41.0 Air Flow (Acoustical Noise Average) (Applicable Law and Safety Standard) cULus File No.(E89936) 6 (Acoustical Noise Measuring Conditions) VDE File No.(1507300) - - - - 1. European Standard (Measurement with in anechoic test chamber under free air condition.) JET Certification ------ 2.1m D PSE (Microphone is placed at a distance of 1m on the side viewed from name plate side.) CCC 3.16dB (Applicable) (Chamber back ground noise max 16dB.) * (Description of Model Number) 2 Distance 1m 11938MB-XXN-NP-00 (At free air) XX : (Voltage Class) 30 * NOTE (At 0 static pressure) Microphone 2565%RH 40 NAME 1 (At 0 air flow) PLATE (The rated values are to be at 25, 5 E 65%RH and 1 atm.) (At factory shipping inspection) 1 10% (The operating voltage range that includes voltage variation should be 10% of the rated voltage.) UNIT mm MATERIAL DATE 2014/1/9 DESCRIPTION SURF. ROUGH. SCALE AC FAN MOTOR F L HEAT TREAT PART NO. (MODEL NO.) SHEET APPROVED CHECK DRAWN T L4 0.1 11938MB11938MB-XXNXXN-NPNP-0000 1/41/4 OO 4L164L16 0.20 2 L 16L63 0.3 FINISH DRAWING NO. REV. NKJM SND NKMY . 63L250 0.5 ECN NO. 11938MB-XXN-NP-00 . MARK DATE REASON / ENGINEER APPROVED DEG 0.5 Ps Pa Pa Static Pressuresure -1-1 N min min Speed123 456 78 (Standard) * NOTE DC 500V 100M 7 7 (Insulation Resistance) (min 100M by DC 500V Megger) (Between Frame and Lead Wire) AC 1800V, 50(60)Hz, 3s 78 8 AC 1500V, 50(60)Hz, 1 A (Dielectric Withstand Voltage) (Guarantee AC 1500V, 50(60)Hz, 1 min) (10%) 25 100,000 (100,000 h at 25) 9 10024 (Life Expectation (L10 Life)) (To be free of defects on practical use after 100h of stored at -40+70 and 24h to ambient humidity.) : +15% : -15% (The motor life is decided as follows Current : more than +15% of initial value. Speed : less than -15% of initial value) -10+60 (Operating) B (Allowable Ambient Temperature) -40+70 (Storage) 9 (No dew formation at operating and storage condition) 0.55 (Mass : kg) (Protection) (Thermally Protected) (JIS C 60068-2-6 ) (Peak-to-Peak value of a vibration) : 1.5mm (Vibration Test) (Frequency) : 1055Hz X, Y, Z 31 (1h in 3 Directions,X, Y, Each) C 2 (JIS C 60068-2-27 ) (Acceleration of Gravity) : 1000m/s (Shock Test) (Time) : 6ms X, Y, Z 31 (1 time in 3 Directions,X, Y, Each) UL (Thermal Class) (Class E ULclass A) (Rotation) (CCW Viewed From Name Plate Side) (Air Flow Direction) (Name Plate Side) D (Producing Country) (JAPAN, CHINA) E UNIT mm MATERIAL DATE 2014/1/9 DESCRIPTION SURF. ROUGH. SCALE AC FAN MOTOR F L HEAT TREAT PART NO. (MODEL NO.) SHEET APPROVED CHECK DRAWN T L4 0.1 11938MB11938MB-XXNXXN-NPNP-0000 2/42/4 OO 4L164L16 0.20 2 L 16L63 0.3 FINISH DRAWING NO. REV. NKJM SND NKMY . 63L250 0.5 ECN NO. 11938MB-XXN-NP-00 . MARK DATE REASON / ENGINEER APPROVED DEG 0.5