Surface Mount Coaxial-Ceramic Resonator Filters and Multiplexers 50 DC to 6 GHz The Big Deal Low insertion loss with excellent power handling Passbands up to 6 GHz Fractional bandwidth from <1 to 25% Low prolfi e designs with min. height of 0.120 Excellent temperature stability Rugged construction to handle demanding environmental conditions Product Overview Mini-Circuits Coaxial-Ceramic Resonator filters offer low insertion loss in very small form factors, using ceramic material with high dielectric constant and superior Q factor. Bandpass and bandstop filters,diplexer and multiplexer designs can be constructed using this technology. Low insertion loss combined with excellent power handling makes these filters well suited for transmitter and receiver signal chains. Advanced filter design and construction can achieve stopband width greater than 3x the center frequency as high as 20 GHz. All our coaxial- ceramic resona tor filters are built with rugged construction, qualified to withstand multiple demanding reflow cycles. Excellent repeatability across units is achieved through precise tuning and process control. Key Features Feature Advantages Low insertion loss Low signal loss results in better SNR in signal chain Fast roll-off Higher selectivity results in better adjacent channel rejection and dynamic range Wide stop band Wide spur-free stopband results in better receiver sensitivity Excellent power handling Well suited for transmitter applications These filter assemblies have been qualified over a wide range of thermal, mechanical and environ - Rugged Construction mental conditions including withstanding the stress of extensive solder reflow cycles Small Size Very well suited for high performance applications where size is a constraint. Very minimal change in electrical performance across temperature makes these filters suitable for Temperature stability a wide range of operating conditions. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 1 of 3Surface Mount Bandpass Filter CBP-1476BD+ 50 1427 to 1525 MHz Generic photo used for illustration purposes only Features CASE STYLE: LW1611-1 Low-profile shielded package Good VSWR, 1.38:1 typical in passband Electrical Specifications at 25C High rejection, 55 dB typ. Parameter F Frequency (MHz) Min. Typ. Max. Unit Fast roll-off Center Frequency - - - 1476 - MHz Pass Band Insertion Loss F1-F2 1427 - 1525 - 2.6 3.5 dB VSWR F1-F2 1427 - 1525 - 1.38 1.67 :1 Applications DC-F3 DC - 1100 60 70 - dB Stop Band, Lower Insertion Loss F3-F4 1100 - 1340 20 26 - dB Aeronautical radio navigation F5-F6 1590 - 1680 20 26 - dB Aviation Stop Band, Upper Insertion Loss F6-F7 1680 - 2500 50 55 - dB Transmitter/Receiver Digital audio broadcasting Maximum Ratings -40C to 85C Operating Temperature Storage Temperature -55C to 100C 5 W at 25C RF Power Input Functional Schematic Permanent damage may occur if any of these limits are exceeded. Typical Performance Data at 25C RF IN RF OUT Frequency Insertion Loss VSWR Frequency Group Delay (MHz) (dB) (:1) (MHz) (ns) 1 98.79 299.51 1427 9.09 10 110.07 434.30 1431 8.93 100 97.43 1085.74 1435 8.79 1100 68.11 78.26 1439 8.67 1250 67.42 43.77 1443 8.56 1331 33.22 17.64 1447 8.46 1340 28.36 14.34 1451 8.37 1407 3.04 1.45 1455 8.31 1427 2.46 1.29 1459 8.26 1451 2.14 1.06 1463 8.23 1476 2.08 1.08 1467 8.22 Typical Frequency Response 1501 2.20 1.18 1471 8.21 1525 2.58 1.03 1476 8.24 FREQUENCY (MHz) 1535 3.11 1.20 1479 8.26 DC F3 F4 F1 F2 F5 F6 F7 1590 28.08 22.95 1483 8.30 1600 32.82 28.54 1487 8.36 1680 69.26 58.40 1491 8.43 2000 56.32 86.00 1501 8.73 2300 56.08 89.09 1521 10.14 2500 56.28 78.61 1525 10.63 CBP-1476BD+ CBP-1476BD+ INSERTION LOSS (Zoomed) INSERTION LOSS 0 0 2 10 4 20 6 30 8 40 10 50 +RoHS Compliant 12 60 The +Suffix identifies RoHS Compliance. See our web site 14 70 for RoHS Compliance methodologies and qualifications 16 80 18 90 20 100 1330 1380 1430 1480 1530 1580 0 500 1000 1500 2000 2500 FREQUENCY (MHz) FREQUENCY (MHz) CBP-1476BD+ CBP-1476BD+ VSWR GROUP DELAY 5.0 16 15 4.5 14 4.0 13 3.5 12 3.0 11 10 2.5 9 2.0 8 1.5 7 1.0 6 1360 1385 1410 1435 1460 1485 1510 1535 1560 1370 1408 1446 1484 1522 1560 FREQUENCY (MHz) FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled REV.A to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp ECO-004071 CBP-1476BD+ Mini-Circuits EDU3474 URJ www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com 201116 Page 2 of 3 INSERTION LOSS (dB) INSERTION LOSS (dB) VSWR GROUP DELAY (ns) INSERTION LOSS (dB)