Ceramic LFCG-92+ Low Pass Filter 1 50 DC to 990 MHz Features Low loss, 0.4 dB typ. Generic photo used for illustration purposes only Small size 0805 (2.0 x 1.25 mm) CASE STYLE: GE0805C-2 Temperature stable LTCC construction +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications Harmonic Rejection Reel Size Devices/Reel VHF/UHF transmitters / receivers 7 20, 50, 100, 200, 500,1000, 4000 lab use 1,2 Electrical Specifications at 25C Parameter F Frequency (MHz) Min. Typ. Max. Unit Insertion Loss DC - F1 DC - 990 0.4 0.8 dB Pass Band Freq. cut-off F2 1400 3.0 dB Specification Definition VSWR DC - F1 DC - 990 1.45 :1 F3 1700 30 dB 40 Stop Band Rejection Loss F4 - F5 1800 - 2700 30 40 dB 20 F6 5000 50 dB 1 In Application where DC voltage is present at either input or output port, coupling capacitors are required. 2 Measured on Mini-Circuits Characterization Test Board TB-800+ 3 1 Maximum Ratings DC F1 F2 F3 F4 F5 F6 Operating Temperature -55C to +100C FREQUENCY Storage Temperature -55C to +100C RF Power Input* 2W at 25C *Passband rating, derate linearly to 1W at 100C ambient Permanent damage may occur if any of these limits are exceeded. Functional Schematic Typical Performance Data at 25C R F IN R F OUT Frequency Insertion Loss VSWR (MHz) (dB) (:1) 10 0.06 1.03 20 0.08 1.02 100 0.11 1.11 500 0.34 1.44 700 0.35 1.32 990 0.44 1.22 1400 2.18 1.90 1500 8.83 9.15 Top View 1700 32.78 46.32 1800 40.59 62.15 2000 35.16 78.35 2500 55.61 117.43 2700 50.94 116.94 3000 43.62 128.23 3500 41.69 125.95 4000 43.14 130.99 5000 60.95 139.99 LFCG-92+ LFCG-92+ INSERTION LOSS VSWR 70 150 Pad Connections 60 Input 8 120 50 4 Output 90 40 Ground 1,3,5,7 30 Isolate (Do not ground) 2,6 60 20 30 10 0 0 0 1000 2000 3000 4000 5000 Notes 0 1000 2000 3000 4000 5000 A. Performance and quality attributes and conditions not expressly stated in this specification document arFREQUENCY (MHz)e intended to be excluded and do not form a part of this specification document. FREQUENCY (MHz) B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. REV. A C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled M151107 to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp ED-16419/27 LFCG-92+ MY/CP/AM Mini-Circuits 150813 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 1 of 2 Available Tape and Reel at no extra cost ATTENUATION (dB) INSERTION LOSS (dB) VSWRLow Pass Filter LFCG-92+ Demo Board MCL P/N: TB-800+ Outline Drawing Suggested PCB Layout (PL-427) PCB Land Pattern Suggested Layout, Tolerance to be within .002 Pad Connections Input 8 4 Output Ground 1,3,5,7 Isolate (Do not ground) 2,6 inch Outline Dimensions ( ) mm A B C D E FG .079 .049 .037 .014 .012 .012 .026 2.01 1.24 0.94 0.36 0.30 0.30 0.66 HJ K L M wt .025 .134 .104 0.014 .039 grams 0.64 3.40 2.64 0.36 0.99 .008 Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits Notes contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 2 of 2