DC Pass Power Splitter/Combiner SEPS-3-33+ 3 Way-0 50 700 to 3000 MHz Maximum Ratings Features Generic photo used for illustration purposes only wide frequency band, 700-3000 MHz Operating Temperature -40C to 85C good isolation, 18 dB typ. CASE STYLE: JF1258 Storage Temperature -55C to 100C good output matching, VSWR 1.1 typ. +RoHS Compliant Power Input (as a splitter) 4W max. good coplanarity The +Suffix identifies RoHS Compliance. See our web site Internal Dissipation 0.5W max. low unbalance for RoHS Compliance methodologies and qualifications DC Current 2.25 A(750mA for each port) shielded case Permanent damage may occur if any of these limits are exceeded. aqueous washable Pin Connections Applications Reel Size Devices/Reel SUM PORT 17 cellular 13 125 GPS PORT 1 4 PCS PORT 2 6 L Band PORT 3 8 GROUND all others Electrical Specifications at 25C Parameter Frequency (MHz) Min. Typ. Max. Unit Outline Drawing Frequency Range 700 3000 MHz PCB Land Pattern 700 - 800 0.5 1.0 800 - 2200 0.9 1.5 dB Insertion Loss Above 4.8 dB 2200 - 2700 1.1 1.6 2700 - 3000 1.2 1.7 700 - 800 14 17 800 - 2200 16 20 dB Isolation 2200 - 2700 14 18 2700 - 3000 14 18 700 - 800 3.0 1.0 800 - 2200 5.0 2.0 Degree Phase Unbalance 2200 - 2700 7.0 2.5 Suggested Layout, 2700 - 3000 9.0 Tolerance to be within .002 4.0 700 - 800 0.5 0.2 800 - 2200 0.5 0.2 dB Amplitude Unbalance 2200 - 2700 0.5 0.1 2700 - 3000 0.8 0.3 inch Outline Dimensions ( ) 700- 800 1.8 1.5 mm 800 - 2200 1.8 1.2 A B C D E F G :1 VSWR (Port S) 2200 - 2700 2.0 1.250 1.000 .200 .125 .100 .060 .040 1.6 31.75 25.40 5.08 3.18 2.54 1.52 1.02 2700 - 3000 2.0 1.5 700 - 800 1.5 H J K L M wt 1.3 -- -- .050 .060 .920 grams 800 - 2200 1.5 1.3 :1 VSWR (Port 1-3) -- -- 1.27 1.52 23.37 4.4 2200 - 2700 1.65 1.4 2700 - 3000 1.65 1.4 Demo Board MCL P/N: TB-513+ Suggested PCB Layout (PL-309) Electrical Schematic DC Through RF+DC RF+DC RF+DC RF+DC Notes REV. OR A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. M151548 B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. SEPS-3-33+ C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled ED-13670 to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp AD/CP/AM 200811 Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Available Tape and Reel at no extra costSEPS-3-33+ Typical Performance Data 1 Freq. Total Loss Amp. Isolation Phase VSWR VSWR VSWR VSWR (MHz) (dB) Unbal. (dB) Unbal. S 1 2 3 (dB) (deg.) S-1 S-2 S-3 1-2 1-3 2-3 700.00 5.27 5.11 5.32 0.22 21.17 16.82 20.80 0.61 1.56 1.29 1.18 1.28 800.00 5.17 5.03 5.23 0.20 26.47 18.13 25.50 0.76 1.34 1.29 1.16 1.28 1000.00 5.11 5.00 5.19 0.19 29.79 20.42 29.11 1.11 1.03 1.25 1.09 1.26 1100.00 5.14 5.03 5.23 0.20 25.96 21.37 26.05 1.24 1.08 1.22 1.08 1.24 1200.00 5.19 5.08 5.29 0.21 23.83 22.20 24.15 1.36 1.16 1.18 1.09 1.20 1400.00 5.32 5.19 5.40 0.22 22.04 23.70 22.49 1.40 1.25 1.08 1.13 1.11 1500.00 5.37 5.23 5.45 0.22 21.87 24.43 22.32 1.37 1.26 1.03 1.13 1.06 1600.00 5.42 5.29 5.49 0.21 22.12 25.13 22.58 1.29 1.24 1.01 1.13 1.02 1800.00 5.43 5.33 5.50 0.16 24.40 25.89 25.06 1.20 1.14 1.04 1.11 1.00 1900.00 5.45 5.39 5.52 0.13 25.68 25.82 26.98 1.19 1.05 1.03 1.10 1.01 2000.00 5.48 5.46 5.56 0.11 25.17 25.35 27.38 1.21 1.09 1.05 1.10 1.05 2200.00 5.68 5.70 5.76 0.08 20.54 23.74 22.65 1.21 1.41 1.17 1.13 1.15 2500.00 5.99 6.01 6.01 0.02 17.07 22.04 18.94 0.92 1.66 1.34 1.09 1.30 2700.00 5.91 5.93 5.88 0.06 17.62 21.67 19.83 1.16 1.45 1.36 1.06 1.33 3000.00 5.78 6.01 5.76 0.25 18.75 19.52 20.18 3.61 1.26 1.26 1.36 1.26 1. Total Loss = Insertion Loss + 4.8dB splitter theoretical loss. SEPS-3-33+ SEPS-3-33+ TOTAL LOSS ISOLATION 7.0 40 1-2 (dB) 1-3 (dB) 2-3 (dB) S-1(dB) S-2(dB) S-3(dB) 6.5 35 6.0 30 5.5 25 5.0 20 4.5 15 600 1000 1400 1800 2200 2600 3000 600 1000 1400 1800 2200 2600 3000 FREQUENCY (MHz) FREQUENCY (MHz) SEPS-3-33+ VSWR 2.2 S-VSWR 1-VSWR 2.0 1.8 1.6 1.4 1.2 1.0 600 1000 1400 1800 2200 2600 3000 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Page 2 of 2 Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com VSWR TOTAL LOSS (dB) ISOLATION (dB)