top hat Surface Mount TC1-1TX+ RF Transformer 50 0.4 to 500 MHz Features usable over 0.4-500 MHz excellent amplitude unbalance, 0.1 dB typ. Generic photo used for illustration purposes only and phase unbalance, 2 deg typ. in 1 dB bandwidth CASE STYLE: AT1521 good return loss plastic base with leads +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site aqueous washable for RoHS Compliance methodologies and qualifications Applications VHF/UHF receivers/transmitters Reel Size Devices/Reel push-pull amplifiers 7 20, 50, 100, 200, 500 13 1000, 2000 Electrical Specifications at 25C Parameter Frequency (MHz) Min. Typ. Max. Unit Impedance Ratio 1 Ohm Frequency Range 0.4 500 MHz 0.4-500 3 Insertion Loss* 0.5-300 2 dB 1-100 1 1-100 0.1 Amplitude Unbalance dB 0.5-300 0.6 1-100 2 Phase Unbalance Degree 0.5-300 5 * Insertion Loss is referenced to mid-band loss, 0.35 dB typ. Maximum Ratings Pin Connections Function Pin Number Parameter Ratings Operating Temperature -40C to 85C PRIMARY DOT 6 Storage Temperature -55C to 100C PRIMARY 4 RF Power 0.25W SECONDARY DOT 1 DC Current 30mA SECONDARY 3 Permanent damage may occur if any of these limits are exceeded. SECONDARY CT 2 Product Marking Config. A Demo Board MCL P/N: TB-145 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. REV. B C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled M164261 to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp TC1-1TX+ ED-9236/2 IG/TD/CP/AM Mini-Circuits 200430 www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 1 of 2 Available Tape and Reel at no extra cost TC1-1TX+ Outline Drawing PCB Land Pattern Orientation Dot on Top Hat & Marking on the Substrate both refers to Pin 1 of the Unit. Suggested Layout, Tolerance to be within .002 Top-hat total thickness: .013 inches MAX. inch Outline Dimensions ( ) mm A B C D E F G H J K wt .150 .150 .160 .050 .040 .025 .028 .065 .190 .030 grams 3.81 3.81 4.06 1.27 1.02 0.64 0.71 1.65 4.83 0.76 0.15 Typical Performance Data FREQUENCY INSERTION INPUT AMPLITUDE PHASE (MHz) LOSS R. LOSS UNBALANCE UNBALANCE (dB) (dB) (dB) (Deg.) 0.30 0.88 15.46 0.06 0.03 1.00 0.57 21.01 0.04 0.05 5.00 0.33 27.35 0.02 0.01 10.00 0.32 28.55 0.02 0.15 50.00 0.40 23.46 0.02 0.63 100.00 0.51 18.34 0.06 1.24 200.00 0.78 13.01 0.21 2.57 300.00 1.10 10.06 0.47 3.99 400.00 1.46 8.16 0.82 5.66 500.00 1.84 6.90 1.26 7.50 INSERTION LOSS INPUT RETURN LOSS 2.2 30.0 25.0 1.8 20.0 1.4 15.0 1.0 10.0 0.6 5.0 0.2 0.0 0 100 200 300 400 500 0 100 200 300 400 500 FREQUENCY (MHz) FREQUENCY (MHz) Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are Notes entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. www.minicircuits.com/MCLStore/terms.jsp C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 2 of 2 INSERTION LOSS (dB) RETURN LOSS (dB)