Surface Mount RF Transformer TC16-161T+ 50 0.6 to 160 MHz Features plastic base with solder plated leads excellent amplitude unbalance, 0.1dB typ. Generic photo used for illustration purposes only and phase unbalance, 0.5 deg. typ. CASE STYLE: AT224-1A +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications Reel Size Devices/Reel impedance matching 7 20, 50, 100, 200, 500 balanced amplifier 13 1000, 2000 Electrical Specifications at 25C Parameter Frequency (MHz) Min. Typ. Max. Unit Impedance Ratio (Secondary/Primary) 16 Ohm Frequency Range 0.6 160 MHz 0.6-160 3 Insertion Loss* 1.5-120 2 dB 3-80 1 *Insertion Loss is referenced to mid-band loss, 0.6 dB typ. Maximum Ratings Pin Connections Function Pin Number Parameter Ratings Operating Temperature -40C to 85C PRIMARY DOT 6 Storage Temperature -55C to 100C PRIMARY 4 RF Power 0.25W SECONDARY DOT 1 DC Current 30mA SECONDARY CT 2 Permanent damage may occur if any of these limits are exceeded. SECONDARY 3 NOT USED 5 Config. A Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. REV. C B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. M151107 C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled TC16-161T+ to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp IG/TD/CP/AM 210412 Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 1 of 2 Available Tape and Reel at no extra cost TC16-161T+ Demo Board MCL P/N: TB-145 Outline Drawing Suggested PCB Layout (PL-244) Lead 1 identifier shall be located in the cross-hatched area shown. PCB Land Pattern Identifier may be either a molded or marked feature. Suggested Layout, Tolerance to be within .002 inch Outline Dimensions ( ) mm A BC D E F .150 .150 .160 .050 .040 .025 3.81 3.81 4.06 1.27 1.02 0.64 GH J K wt .028 .065 .190 .030 grams 0.71 1.65 4.83 0.76 0.15 FREQUENCY INSERTION INPUT (MHz) LOSS R. LOSS (dB) (dB) 0.60 1.40 14.15 1.00 1.16 17.14 1.50 0.99 19.51 5.00 0.64 29.93 10.00 0.59 36.06 50.00 0.74 16.77 80.00 0.94 12.74 100.00 1.10 10.87 120.00 1.31 9.38 160.00 1.83 7.18 TC16-161T+ TC16-161T+ INSERTION LOSS INPUT RETURN LOSS 5.0 50 4.0 40 30 3.0 20 2.0 10 1.0 0 0.0 0 50 100 150 200 0 50 100 150 200 FREQUENCY (MHz) FREQUENCY (MHz) Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are Notes entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuits applicable established test performance criteria and measurement instructions. www.minicircuits.com/MCLStore/terms.jsp C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms) Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales minicircuits.com Page 2 of 2 INSERTION LOSS (dB) RETURN LOSS (dB)