TENTATIVE <Color TFT-LCD Module> AA090ME01--T1 9.0 inch WVGA FOR INDUSTRIAL USE AA090ME01--T1 FEATURES Touch panel attached (4-wire analog resistive) Super Wide Viewing Angle (-88~88H, V) High Color Saturation (72% compared to NTSC) LED Lifetime 100,000h (Typ.) *1) *1) LED life time is defined as the time when the brightness becomes 50% of the initial value. The life time of the backlight depends on the ambient temperature. The life time will decrease under high temperature. ITEM SPECIFICATION 196.8 (H) 118.08 (V) Display Area (mm) (9.0-inch diagonal) Number of Dots 800 3 (H) 480 (V) Pixel Pitch (mm) 0.246 (H) 0.246 (V) Color Pixel Arrangement RGB vertical stripe Display Mode Normally black Number of Color 262k(6 bit/color), 16.7M(8 bit/color) 2 Luminance (cd/m ) 320 Viewing Angle (CR 10) 88~88 (H), 88~88 (V) Surface Treatment (Touch panel) Anti-glare and hard-coating 3H Electrical Interface LVDS (6 bit/8 bit) Module Size (mm) 219.0 (W) 136.2 (H) 11.1 (D) Module Mass (g) 410 Backlight Unit LED, edge-light Touch Panel 4-wire analog resistive Characteristic value without any note is typical value. Publication Date : May,2020 1 <Color TFT-LCD Module> TENTATIVE AA090ME01--T1 9.0 inch WVGA FOR INDUSTRIAL USE Keep safety first in your circuit designs Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of non-flammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials These materials are intended as a reference to assist our customers in the selection of the Mitsubishi semiconductor product best suited to the customers application they do not convey any license under any intellectual property rights, or any other rights, belonging to Mitsubishi Electric Corporation or a third party. Mitsubishi Electric Corporation assumes no responsibility for any damage, or infringement of any third-partys rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Mitsubishi Electric Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Mitsubishi Electric Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Mitsubishi Electric Corporation by various means, including the Mitsubishi Semiconductor home page (