XUP-VV4 PCIe FPGA Board UltraScale+ PCIe board with VU13P BittWares XUP-VV4 is an UltraScale+ VU13P FPGA-based PCIe card, ideal for high-density datacenter applications. The Xilinx UltraScale+ VU13P FPGA gives designers incredible performance potential, with 3.8M logic elements yet with a power density that makes thermal management difficult. The XUP-VV4 meets this challenge with BittWares Viper platform, supporting large FPGA loads, up to 512 GBytes DDR4, and 4x 100 Gbps Ethernet. BittWares Viper platform uses advanced computer flow simulation to drive the physical board design in a thermals first approach, including the use of heat pipes, airflow channels, and arranging components to maximize the limited available airflow in a server. The XUP-VV4 features air cooling by default, but liquid cooling is also available. The board features the D2104 lidless package from Xilinxallowing the heat pipes to contact the die directly, instead of through the heat spreader lid. Xilinx VU13P FPGA: lidless package is used by BittWares Viper thermal management for enhanced cooling performance Air or VU13P FPGA: 4x 3.8 million LCs 100GbE key features Liquid FPGA by Xilinx via 4 QSFP28 Cooled Board Management Controller for Intelligent 4x QSFP28s for 4x Platform Management 40/100GbE or 16x 10/25GbE 2x UltraPort SlimSAS for serial expansion USB for BMC, FPGA JTAG, and FPGA UART 4x DIMMs for up to 16nm FPGA 512 GBytes DDR4 or with up to 3.8 million LCs Gen3 x16 PCIe 2.3 Gbits QDR-II+Additional Services Take advantage of BittWares range of design, integration, and support options Customization Server Integration Application Optimization Service and Support Additional specification options Available pre-integrated Ask about our services to help you BittWare Developer Site or accessory boards to meet in our TeraBox servers in a port, optimize, and benchmark provides online documentation your exact needs. range of configurations. your application. and issue tracking. Board Specifications Board Voltage, current, temperature monitoring FPGA Virtex UltraScale+ Management Power sequencing and reset VU13P in D2104 package Controller Field upgrades Core speed grade - 2 FPGA configuration and control Contact BittWare for other FPGA options Clock configuration 2 I C bus access On-board Flash Flash memory for booting FPGA USB 2.0 * External memory Voltage overrides 4 DIMM sites, each supporting : Up to 128 GBytes DDR4 x72 with ECC Cooling Standard: double-width passive heatsink Up to 576 Mbits dual QDR-II+ x18 (2 indepen- Optional: double-width liquid cooling dent 288 Mbit banks) Electrical On-board power derived from 12V PCIe slot & an Host interface x16 Gen3 interface direct to FPGA AUX connector (8-pin) Power dissipation is application dependent USB ports USB C: connects to a breakout board for USB UART, 1 PPS input, 10MHz clock input, UART Environmental Operating temperature 5C to 35C Micro USB: connects to USB-JTAG and BMC Form factor 3/4-length, standard-height PCIe dual-slot board UltraPort SlimSAS 2 UltraPort SlimSAS on rear edge connected to 10 x 4.37 inches (254 x 111.15 mm) FPGA via 16x GTY transceivers Can support an additional x16 or x8 PCIe interface (requires soft IP core and additional slot) QSFP cages 4 QSFP28 (zQSFP) cages on front panel connected Development Tools directly to FPGA via 16 transceivers Each supports 100GbE, 40GbE, 4x 25GbE, or 4x System BittWorks II Toolkit - host, command, and debug 10GbE and can be combined for 400GbE development tools for BittWare hardware FPGA development FPGA Examples - example Vivado projects Xilinx Tools - Vivado Design Suite * DIMM sites 1/2 and sites 3/4 must have the same memory type, or be empty. To learn more, visit www.BittWare.com Rev 2019.03.29 March 2019 BittWare 2019 UltraScale, Virtex, and Vivado are registered trademarks of Xilinx Corp. All other products are the trademarks or registered trademarks of their respective holders.