MNS2-9-W2-PB-ST Monnit

by The Leading Enterprise Internet of Things Solution Wireless Button Press Sensors General Description Features of Monnit ALTA Sensors The ALTA Wireless Button Sensor detects when the Wireless range of 1,200+ feet through 12+ walls * button has been pressed triggering a notification from Frequency-Hopping Spread Spectrum (FHSS) the system. Improved interference immunity Improved power management for longer battery life ** Detects when button is pressed (12+ years on AA batteries) Encrypt-RF Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages) Principle of Operation Datalogs 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power The ALTA Wireless Button Sensor sends a signal to cycle): the iMonnit Online Sensor Monitoring and Notification - 10-minute heartbeats = ~ 22 days System when the button is pressed triggering a - 2-hour heartbeats = ~ 266 days notification via SMS text or email and tracking the data Over-the-air updates (future proof) in the online system and can be reviewed and exported Free iMonnit basic online wireless sensor monitoring as a data sheet or graph. Notifications can be set up and notification system to configure sensors, view through the online system to alert the user immediately data and set alerts via SMS text and email when movement is detected with the ability to only notify within time of day parameters. Actual range may vary depending on environment. * ** Battery life is determined by sensor reporting frequency and other variables. Other power options Example Applications are also available. Wireless Range Comparison Hotel/motel front desk call button Restroom service/clean-up request button Wireless Range Comparison Service request button Monnit ALTA Many additional applications Monnit Other Wireless Platforms Wifi Bluetooth PAGE 11.125 in Pinch and Pull (28.575 mm) To Change Battery 2.0 in (50.8 mm) CR2032 BATTERY 0.875 in (22.225 mm) ALTA Commercial Coin Cell Wireless Button Press Sensor Technical Specifications Supply voltage 2.03.8 VDC * Current consumption 0.2 A (sleep mode), 0.7 A (RTC sleep), 570 A (MCU idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode) Operating temperature range (board circuitry and coin cell) -7C to +60C (20F to +140F) Optimal battery temperature range (coin cell) +10C to +50C (+50F to +122F) Button type Momentary Number of operations 10,000,000 Datalogging Datalogs 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle): - 10-minute heartbeats = ~ 22 days - 2-hour heartbeats = ~ 266 days Wireless range 1,200+ ft non-line-of-sight Security Encrypt-RF (256-bit key exchange and AES-128 CTR) Weight 0.7 ounces Certifications 900 MHz product FCC ID: ZTL-G2SC1 and IC: 9794A- Industry G2SC1. 868 and 433 MHz product tested and found to Canada comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950 Hardware cannot withstand negative voltage. Please take care when connecting a power device. * PinchPower Enclosures CR2032 BATTERY CR2032 BATTERY + Pinch Pull Press (sensor away from base) (sensor back into base) (press in on the sides) PAGE 2