EVKT850-KNOB-Q-01A Rotary Knob Kit for the MagAlpha DESCRIPTION FEATURES The EVKT-KNOB is an evaluation kit for the Ready-to-Use Knob with End-of-Shaft MagAlpha magnetic position sensor family. The Magnet EVKT-KNOB allows users to run and test the Extra Spacers MagAlpha sensor quickly. It is delivered Compatible with MagAlpha Communication assembled with a knob and magnet. The Interface Kit (EVKT-MACOM) sensor is mounted in an end-of-shaft APPLICATIONS configuration. Knobs The EVKT-KNOB is compatible with the Potentiometer Replacements MACOM kit, offering seamless connection and Dials operation of the MagAlpha and allowing users Appliances to evaluate MagAlpha functionalities and performances, such as noise level, refresh rate, Consumer Goods power-up time, magnetic field dependence, and All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive. For MPS green status, please visit the MPS website under Quality Assurance. so on. MPS and The Future of Analog IC Technology are registered trademarks of Monolithic Power Systems, Inc. OVERVIEW Figure 1: EVKT-KNOB EVKT-KNOB www.MonolithicPower.com 1 12/10/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2018 MPS. All Rights Reserved. EVKT-KNOB ROTARY KNOB KIT FOR THE MAGALPHA Board Type Different board types are available, and each of them has a different schematic and layout design. The board type to use is determined by the selected sensor part number. Table 1: Board Type Board Type Kit Part Number Board Part Number MPS Chip Part Number EVKT100-KNOB EVMA100-Q-00A MA100 EVKT300-KNOB EVMA300-Q-00A MA300 Board type 1 EVKT700-KNOB EVMA700-Q-00A MA700 EVKT750-KNOB EVMA750-Q-00A MA750 EVKT102-KNOB EVMA102-Q-01A MA102 EVKT302-KNOB EVMA302-Q-01A MA302 EVKT310-KNOB EVMA310-Q-01A MA310 EVKT702-KNOB EVMA702-Q-01A MA702 Board type 2 EVKT710-KNOB EVMA710-Q-01A MA710 EVKT730-KNOB EVMA730-Q-01A MA730 EVKT800-KNOB EVMA800-Q-01A MA800 EVKT820-KNOB EVMA820-Q-01A MA820 EVKT850-KNOB EVMA850-Q-01A MA850 EVKT-KNOB Content Figure 2: Kit Contents 1. EVMA board with MagAlpha mounted 2. 0.7mm and 2.0mm spacers 3. Knob with magnet 4. Extra cylinder magnet, NdFeB N35 D=5mm H=2.5mm (not shown) EVKT-KNOB www.MonolithicPower.com 2 12/10/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2018 MPS. All Rights Reserved.