MP1495 High Efficiency 3A, 16V, 500kHz Synchronous Step Down Converter The Future of Analog IC Technology DESCRIPTION FEATURES The MP1495 is a high-frequency, synchronous, Wide 4.5V-to-16V Operating Input Range rectified, step-down, switch-mode converter 80m/30m Low R Internal Power DS(ON) with built-in power MOSFETs. It offers a very MOSFETs compact solution to achieve a 3A continuous High-Efficiency Synchronous Mode output current with excellent load and line Operation regulation over a wide input supply range. The Fixed 500kHz Switching Frequency MP1495 has synchronous mode operation for Synchronizes to a 200kHz to 2MHz External higher efficiency over the output current load Clock range. AAM Power-Save Mode Internal Soft-Start Current-mode operation provides fast transient response and eases loop stabilization. OCP Protection and Hiccup Thermal Shutdown Full protection features include over-current Output Adjustable from 0.8V protection and thermal shut down. Available in an 8-pin TSOT-23 package The MP1495 requires a minimal number of APPLICATIONS readily-available standard external components, and is available in a space-saving 8-pin Notebook Systems and I/O Power TSOT23 package. Digital Set-Top Boxes Flat-Panel Television and Monitors Distributed Power Systems All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Quality Assurance. MPS and The Future of Analog IC Technology are Registered Trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION Efficiency vs. Load Current R4 V =12V, V =3.3V, AAM=0.5V IN OUT 4.5V-16V 10 5 2 VIN IN BST 100 C1 C4 22 MP1495 95 3.3V/2A 3 6 SW EN/SYNC L1 90 EN/ C2 R1 SYNC 7 47 V =5V V =12V R9 IN 85 IN 40.2k VCC 33k 8 FB C3 R3 80 90.9k 0.1 1 R2 AAM 13k GND V =16V IN 75 R5 4 10k 70 0.01 0.1 1 10 LOAD CURRENT(A) MP1495 Rev. 1.05 www.MonolithicPower.com 1 4/13/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2016 MPS. All Rights Reserved. NOT RECOMMENDED FOR NEW DESIGNS REFER TO MP1477MP1495 SYNCHRONOUS STEP-DOWN CONVERTER ORDERING INFORMATION Part Number* Package Top Marking MP1495DJ TSOT-23-8 ACS For Tape & Reel, add suffix Z (e.g. MP1495DJZ) For RoHS, compliant packaging, add suffix LF (e.g. MP1495DJLFZ). PACKAGE REFERENCE (1) (5) ABSOLUTE MAXIMUM RATINGS Thermal Resistance JA JC V ..................................................-0.3V to 17V TSOT-23-8............................. 100..... 55... C/W IN V ...................................................................... SW Notes: -0.3V (-5V for <10ns) to 17V (19V for <10ns) 1) Exceeding these ratings may damage the device. V ......................................................... V +6V BS SW 2) About the details of EN pins ABS MAX rating, please refer to (2) Page 9, Enable/SYNC control section. All Other Pins................................ -0.3V to 6V 3) The maximum allowable power dissipation is a function of the (3) Continuous Power Dissipation (T = +25C) maximum junction temperature T (MAX), the junction-to- A J ambient thermal resistance , and the ambient temperature JA ...........................................................1.25W T . The maximum allowable continuous power dissipation at A Junction Temperature...............................150C any ambient temperature is calculated by P (MAX) = (T D J (MAX)-T )/ . Exceeding the maximum allowable power Lead Temperature ....................................260C A JA dissipation will cause excessive die temperature, and the Storage Temperature................. -65C to 150C regulator will go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent (4) Recommended Operating Conditions damage. 4) The device is not guaranteed to function outside of its Supply Voltage V ...........................4.5V to 16V IN operating conditions. Output Voltage V ................ 0.8V to VIN*D OUT MAX 5) Measured on JESD51-7, 4-layer PCB. Operating Junction Temp. (T ). -40C to +125C J MP1495 Rev. 1.05 www.MonolithicPower.com 2 4/13/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2016 MPS. All Rights Reserved. NOT RECOMMENDED FOR NEW DESIGNS REFER TO MP1477