MP2161 2A, 6V, 1.5MHz, 17 A I , COT Q Synchronous Step Down Switcher In 8-pin TSOT23 The Future of Analog IC Technology DESCRIPTION FEATURES The MP2161 is a monolithic step-down switch Very Low I : 17 A Q mode converter with built-in internal power Default 1.5MHz Switching Frequency MOSFETs. It achieves 2A continuous output EN and Power Good for Power Sequencing current from a 2.5V to 6V input voltage with Wide 2.5V to 6V Operating Input Range excellent load and line regulation. The output Output Adjustable from 0.6V voltage can be regulated as low as 0.6V. Up to 2A Output Current 100% Duty Cycle in Dropout The Constant-On-Time control scheme 100m and 60m Internal Power MOSFET provides fast transient response and eases loop Switches stabilization. Fault condition protection includes cycle-by-cycle current limiting and thermal Cycle-by-Cycle Over Current Protection shutdown. Short Circuit Protect with Hiccup Mode Stable with Low ESR Output Ceramic The MP2161 is available in the small TSOT23-8 Capacitors package and requires a minimum number of Available in a TSOT23-8 Package readily available standard external components. APPLICATIONS The MP2161 is ideal for a wide range of applications including High Performance DSPs, Wireless/Networking Cards FPGAs, PDAs, and portable instruments. Portable Instruments Battery Powered Devices Low Voltage I/O System Power All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Products, Quality Assurance page. MPS and The Future of Analog IC Technology are registered trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION MP2161 Rev. 1.1 www.MonolihicPower.com 1 1/18/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2017 MPS. All Rights Reserved. MP2161 2A, 6V, 1.5MHz SYNCHRONOUS STEP-DOWN SWITCHER ORDERING INFORMATION Part Number* Package Top Marking MP2161GJ TSOT23-8 See Below * For Tape & Reel, add suffix Z (e.g. MP2161GJZ) TOP MARKING AEB: product code of MP2161GJ Y: year code PACKAGE REFERENCE TOP VIEW PG 1 8 EN VIN FB 2 7 SW AGND 3 6 PGND OUT 4 5 TSOT23-8 (1) (4) ABSOLUTE MAXIMUM RATINGS Thermal Resistance JA JC Supply Voltage V ...................................... 6.5V IN TSOT23-8 .............................. 100 ..... 55 ... C/W V ..................................................................... SW Notes: -0.3V (-1.5V for <20ns&-4V for <8ns) to 6.5V 1) Exceeding these ratings may damage the device. (10V for <10ns) 2) The maximum allowable power dissipation is a function of the maximum junction temperature T (MAX), the junction-to- J All Other Pins ................................ -0.3V to 6.5 V ambient thermal resistance , and the ambient temperature JA Junction Temperature ............................... 150 C T . The maximum allowable continuous power dissipation at A any ambient temperature is calculated by P (MAX) = (T Lead Temperature .................................... 260 C D J (MAX)-T )/ . Exceeding the maximum allowable power (2) A JA Continuous Power Dissipation (T = +25C) A dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal ................................................ 1.25W shutdown circuitry protects the device from permanent Storage Temperature ............... -65C to +150 C damage. 3) The device is not guaranteed to function outside of its (3) Recommended Operating Conditions operating conditions. 4) Measured on JESD51-7, 4-layer PCB. Supply Voltage V ............................. 2.5V to 6V IN Operating Junction Temp. (T ). -40C to +125C J MP2161 Rev. 1.1 www.MonolihicPower.com 2 1/18/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2017 MPS. All Rights Reserved.