MP4560 2A, 2MHz, 55V Step-Down Converter The Future of Analog IC Technology FEATURES DESCRIPTION Wide 3.8V to 55V Operating Input Range The MP4560 is a high frequency step-down 250m Internal Power MOSFET switching regulator with integrated internal high- Up to 2MHz Programmable Switching side high voltage power MOSFET. It provides 2A Frequency output with current mode control for fast loop 140 A Quiescent Current response and easy compensation. Ceramic Capacitor Stable The wide 3.8V to 55V input range accommodates Internal Soft-Start a variety of step-down applications, including Up to 95% Efficiency those in automotive input environment. A 12A Output Adjustable from 0.8V to 52V shutdown mode supply current allows use in Available in 3x3 10-Pin QFN and SOIC8 battery-powered applications. with Exposed Pad Packages High power conversion efficiency over a wide APPLICATIONS load range is achieved by scaling down the switching frequency at light load condition to High Voltage Power Conversion reduce the switching and gate driving losses. Automotive Systems Industrial Power Systems The frequency foldback helps prevent inductor Distributed Power Systems current runaway during startup and thermal Battery Powered Systems shutdown provides reliable, fault tolerant operation. All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Products, Quality Assurance page. By switching at 2MHz, the MP4560 is able to MPS and The Future of Analog IC Technology are registered trademarks of prevent EMI (Electromagnetic Interference) noise Monolithic Power Systems, Inc. problems, such as those found in AM radio and ADSL applications. The MP4560 is available in small 3mm x 3mm 10-pin QFN and SOIC8 with exposed pad packages. TYPICAL APPLICATION Efficiency V =3.3V OUT fs=500kHz 100 Vin=12V 90 80 70 Vin=55V 60 50 40 30 20 10 0 0 0.5 1 1.5 2 OUTPUT CURRENT (A) MP4560 Rev. 1.01 www.MonolithicPower.com 1 2/27/2014 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2014 MPS. All Rights Reserved. EFFICIENCY (%)MP4560 2A, 2MHz, 55V STEP-DOWN CONVERTER ORDERING INFORMATION Part Number Package Top Marking 3x3 QFN10 MP4560DQ* T8 SOIC8E MP4560DN** MP4560DN * For Tape & Reel, add suffix Z (e.g. MP4560DQZ). For RoHS compliant packaging, add suffix LF (e.g. MP4560DQLFZ) ** For Tape & Reel, add suffix Z (e.g. MP4560DNZ). For RoHS compliant packaging, add suffix LF (e.g. MP4560DNLFZ) PACKAGE REFERENCE TOP VIEW TOP VIEW SW 1 10 BST SW 1 8 BST SW 2 9 VIN EN 2 7 VIN EN 3 8 VIN COMP 3 6 FREQ COMP 4 7 FREQ FB 4 5 GND FB 5 6 GND EXPOSED PAD EXPOSED PAD 3x3 QFN10 SOIC8E (1) (4) ABSOLUTE MAXIMUM RATINGS Thermal Resistance JA JC Supply Voltage (V ).....................0.3V to +60V 3x3 QFN10..............................50 ...... 12... C/W IN Switch Voltage (V )............ 0.5V to V + 0.5V SW IN SOIC8 (Exposed Pad) ............50 ...... 10... C/W BST to SW .....................................0.3V to +5V Notes: All Other Pins.................................0.3V to +5V 1) Exceeding these ratings may damage the device. (2) Continuous Power Dissipation(T = +25C) 2) The maximum allowable power dissipation is a function of the A maximum junction temperature T (MAX), the junction-to- J 3x3 QFN102.5W ambient thermal resistance , and the ambient temperature JA SOIC8 (Exposed Pad)2.5W T . The maximum allowable continuous power dissipation at A any ambient temperature is calculated by P (MAX) = (T D J Junction Temperature...............................150C (MAX)-T )/ . Exceeding the maximum allowable power A JA Lead Temperature ....................................260C dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal Storage Temperature.............. 65C to +150C shutdown circuitry protects the device from permanent (3) damage. Recommended Operating Conditions 3) The device is not guaranteed to function outside of its Supply Voltage V ...........................3.8V to 55V operating conditions. IN 4) Measured on JESD51-7, 4-layer PCB. Output Voltage V .........................0.8V to 52V OUT Operating Junction Temp. (T ). -40C to +125C J MP4560 Rev. 1.01 www.MonolithicPower.com 2 2/27/2014 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2014 MPS. All Rights Reserved.