MP8801DJ-2.85-LF-Z Monolithic Power Systems

MP8801 Low Dropout 150mA Linear Regulator The Future of Analog IC Technology DESCRIPTION FEATURES Low 100mV Dropout at 100mA Output The MP8801 is a low-noise, low-dropout linear 2% Accurate Output Voltage regulator. It operates from a 2.7V to 6.5V input voltage and regulates the output voltage with Fixed Output Voltage Options of 2.5V, 2.85V or 3.3V 2% accuracy at 2.5V, 2.85V or 3.3V. The internally set output voltage may be overridden Adjustable Output Voltage from 1.25V with an external resistor divider from 1.25V to to 5V using an External Resistor Divider 5V. Up to 6.5V Input Voltage High PSRR The MP8801 can supply up to 150mA of load o 70dB at 1kHz current. The MP8801 features thermal overload o 30dB at 1MHz protection and is available in a 5-pin TSOT23-5 Better Than 0.001%/mA Load package. Regulation FIXED VOLTAGE PART NUMBERS Stable With Low-ESR Output Capacitor Low 125 A Ground Current Part Number Output Voltage Internal Thermal Protection MP8801DJ2.5 2.5V MP8801DJ2.85 2.85V APPLICATIONS MP8801DJ3.3 3.3V 802.11 PC Cards Mobile Handset PLL Power EVALUATION BOARD REFERENCE Audio Codec Power Board Number Output* Dimensions For MPS green status, please visit MPS website under Quality Assurance. MPS and The Future of Analog IC Technology are Registered Trademarks of EV8801DJ-00A 2.85V 2.0X x 2.0Y x 0.4Z Monolithic Power Systems, Inc. Default output voltage adjustable from 1.25V to 5.0V using an * external resistor divider. TYPICAL APPLICATION V vs I DROPOUT LOAD V 160 IN 2.7V to 6.5V 1 5 OUTPUT 140 IN OUT 1.5V to 5V 120 MP8801DJ-X.X R1 100 3 4 EN GND FB 80 V IN The sum of 2 60 EN (Pin3) R1 and R2 R2 may be connected should not 40 to IN (Pin 1) directly exceed 100k 20 0 0 20 40 60 80 100 120 140 160 I (mA) LOAD MP8801 Rev. 1.9 www.MonolithicPower.com 1 10/10/2011 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2011 MPS. All Rights Reserved. V (mV) DROPOUTMARKING MP8801 LOW DROPOUT, 150mA LINEAR REGULATOR ORDERING INFORMATION Part Number* Package Top Marking Free Air Temperature (T ) A MP8801DJ2.5 TSOT23-5 MP8801DJ2.85 -40 C to +85 C MP8801DJ3.3 * For Tape & Reel, add suffix Z (g. MP8801DJ2.85Z). For RoHS compliant packaging, add suffix LF (e.g. MP8801DJ2.85LFZ) PACKAGE REFERENCE TOP VIEW IN 1 5 OUT GND 2 EN 3 4 FB (1) (4) ABSOLUTE MAXIMUM RATINGS Thermal Resistance JA JC IN Supply Voltage ........................-0.3V to +7.0V TSOT23-5 ..............................220 .... 110.. C/W FB Voltage ......................... -0.3V to V + 0.3V OUT Notes: All Other Pins..................................-0.3V to +6V 1) Exceeding these ratings may damage the device. (2) 2) The maximum allowable power dissipation is a function of the Continuous Power Dissipation (T = +25C) A maximum junction temperature T (MAX), the junction-to- J ...0.56W ambient thermal resistance , and the ambient temperature JA T . The maximum allowable continuous power dissipation at A Junction Temperature...............................150C any ambient temperature is calculated by P (MAX) = (T D J Lead Temperature ....................................260C (MAX)-T )/ . Exceeding the maximum allowable power A JA dissipation will cause excessive die temperature, and the Storage Temperature ............. 65C to +150C regulator will go into thermal shutdown. Internal thermal (3) Recommended Operating Conditions shutdown circuitry protects the device from permanent damage. Input Voltage...................................2.7V to 6.5V 3) The device is not guaranteed to function outside of its Output Voltage.................................1.25V to 5V operating conditions. 4) Measured on approximately 1 square of 1 oz copper Load Current...........................150mA Maximum Maximum Junction Temp. (T )................+125C J MP8801 Rev. 1.9 www.MonolithicPower.com 2 10/10/2011 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2011 MPS. All Rights Reserved.