M216FCN 64.0MHZ MtronPTI

M2 Series 5x7 mm, 3.3 Volt, HCMOS/TTL Compatible Output, Clock Oscillator Features: Leadless Chip Carrier (LCC) package Seam sealed package Tri-state or Standby function options Stabilities to 20 ppm Fully RoHS 6 compliant Applications: Microprocessors/Controllers, DSP Gig E, SONET Industrial Controllers Broadband Access Test & Measurement Equipment PARAMETER Symbol Min. Typ. Max. Units Condition/Notes Frequency Range F 1.5 135 MHz See Note 1 Operating Temperature TA (See ordering information) Storage Temperature TS -55 +125 C Frequency Stability F/F (See ordering information) Aging st 1 Year 3 ppm Thereafter (per year) ppm 2 Input Voltage Vdd 3.0 3.3 3.6 V Input Current Idd 10 mA 1.500 to 20.000 MHz 20 mA 20.001 to 50.000 MHz 30 mA 50.001 to 67.000 55 mA 67.001 to 135.000 MHz Standby Current 10 A Q Output Type Only Output Type HCMOS/TTL Compatible Load 15/2 PF/TTL See Note 2 Symmetry (Duty Cycle) (See ordering information) Vdd Logic 1 Level Voh 90% Vdd V HCMOS Load Vdd -0.5 V TTL Load Logic 0 Level Vol 10% Vdd V HCMOS Load 0.5 V TTL Load Output Current mA 4 Rise/Fall Time Tr/Tf See Note 3 6 ns 1.500 to 50.000 MHz 4 ns 50.001 to 80.000 MHz 2 ns 80.001 to 135.000 MHz Standby/Tristate Function Input Logic 1 or floating: output active Input Logic 0 output disables to high-Z Start up Time 10 ms Random Jitter Rj 4 10 ps RMS 1-Sigma Mechanical Shock Per MIL-STD-202, Method 213, Condition C (100 gs, 6 mS duration, sinewave) Vibration Per MIL-STD-202, Method 201 & 204 (10 gs from 10-2000 Hz) -8 Hermeticity Per MIL-STD-202, Method 112, (1x10 atm. cc/s of Helium) Thermal Cycle Per MIL-STD-883, Method 1010, Condition B (-55C to +125C, 15 min. dwell, 10 cycles) Solderability Per EIAJ-STD-002 Soldering Conditions See solder profile, Figure 1 1. Consult factory for availability of higher frequencies. 2. HCMOS Load - See Load circuit diagram. Consult factory with nonstandard output load requirements. 3. Rise/Fall times are measured between 0.5 V and 2.4 V with TTL load, and between 10% Vdd and 90% Vdd with HCMOS load. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Revision:12-21-10 Environmental Electrical Specifications M2 Series 5x7 mm, 3.3 Volt, HCMOS/TTL Compatible Output, Clock Oscillator Load Circuit Diagram DUT Output Test Point C Load Note: C Load includes probe and fixturing. Pin Connections PIN Function 1 N/C, Tristate or Standby 2 Ground 3 Output 4 +Vdd MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.