5600 Series
www.murata-ps.com
10A Current Sensing Transformers
SELECTION GUIDE
Number of Inductance DC Terminating Resistance
Order Code Turns Min. Resistance to Produce 1VOUT/1AIN
1Turn Pins 1&3 Pins 1&3,
56050C 50 4.5mH @1V, 50kHz 0.133 - 0.199 50
56100C 100 18mH @1V, 50kHz 0.93 - 1.40 100
56200C 200 72mH @1V, 10kHz 1.87 - 2.81 200
56300C 300 160mH @1V, 10kHz 5.73 - 8.59 300
56T100C 100CT 18mH @1V, 50kHz 0.93 - 1.40 100
FEATURES
56T200C 200CT 72mH @1V, 10kHz 1.87 - 2.81 200
56T300C 300CT 160mH @1V, 10kHz 5.73 - 8.59 300
RoHS compliant
50, 100, 200 & 300 Turn variants
ABSOLUTE MAXIMUM RATINGS
Operating free air temperature range -40C to 85C
Primary current rating 10A
Storage temperature range -40C to 125C
20kHz-200kHz frequency range
1
SOLDERING INFORMATION
Centre tapped variants available
Peak wave solder temperature 300C for 10 seconds
Pin nish Tin
DESCRIPTION
The 5600 series of current sense transformers
TECHNICAL NOTES
are designed to monitor AC currents. They can
ISOLATION VOLTAGE
be used for high frequency current sensing, for
All 5600 current sense transformers are tested at 500Vdc for a minimum of 1 second during our standard test
example in switched-mode power supplies, motor
procedure.
control and electronic lighting ballasts.
In addition, as part of our qualication process carried out prior to product launch, the 5600 series demonstrated
no isolation breakdown at 10kVdc or 6kVac with a bare conductor as the primary winding. Whilst this does not
imply these parts are designed for environments where such high voltages may be present, it does demonstrate
the level of isolation voltage these products are able to withstand. Full mains safety isolation can be achieved with
appropriately insulated wire on the primary winding.
Specications typical at T = 25C
A
1 For further information, please visit www.murata-ps.com/rohs
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
KMP_5600C_C01 Page 1 of 256300C
XYYWW
5600 Series
10A Current Sensing Transformers
PACKAGE SPECIFICATIONS
MECHANICAL DIMENSIONS RECOMMENDED FOOTPRINT DETAILS
Schematic
16.79 (0.661) 12.70 (0.500)
1
2*
8.89 (0.350)
3
6.35 (0.250)
5.00 (0.197)
x3 HOLES
0.065 (1.65)
0.059 (1.50)
0.10 (0.004)
Unless otherwise stated, all dimensions in mm (inches) 0.25 (0.010).
12* 3
TUBE OUTLINE DIMENSIONS
11.20 (0.441)
0.600.15 (0.0240.006)
5.08 (0.200)
6.35 (0.250)
22.20 (0.874)
4.06 (0.160) 30.00 (1.181)
0.790.05
(0.0310.002)
12.70 (0.500)
2.100.25 (0.0830.010)
7.00 (0.276)
Package weight: 5.7Typ.
Tube length: 4752 [18.7010.079]
*Pin 2 is tted on 56TXXXC variants only.
Unless otherwise stated, all dimensions in mm (inches) 0.25 (0.010).
Arrow designates winding direction referenced to inner core surface.
Tube quantity: 25
Unless otherwise stated, all dimensions in mm (inches) 0.25 (0.010).
Tube material: Antistatic coated clear PVC
Murata Power Solutions, Inc.
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
11 Cabot Boulevard, Manseld, MA 02048-1151 U.S.A. technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specications are subject to change without
ISO 9001 and 14001 REGISTERED notice. 2012 Murata Power Solutions, Inc.
www.murata-ps.com/support
KMP_5600C_C01 Page 2 of 2
1.02 (0.040)
20.19 (0.795)