76601/3C Murata

766 Series www.murata-ps.com Pulse Transformers 1 SELECTION GUIDE Turns Order Code Ratio 2% H Vs H pF Vrms 76600/1C 1:1 1916 17.5 0.60 49 1.50 76600/2C 1:1 492 8.5 0.30 22 0.80 A 76600/3C 1:1 219 5.5 0.25 14 0.50 76600/4C 1:1 50 4.0 0.20 10 0.40 FEATURES 76601/1C 1:1 1916 17.5 0.60 49 1.50 1 RoHS compliant 76601/2C 1:1 492 8.5 0.30 22 0.80 76601/3C 1:1 219 5.5 0.25 12 0.50 500 4 Congurations B 76601/20C 1:1 20.1 2.5 0.20 5 0.20 Inductance to 11.7mH 76601/23C 1:1 700 10.5 0.20 35 0.20 Up to 50 Vs ET 76601/24C 1:1 11.7mH 50.5 0.86 250 1.35 76602/1C 1:1:1 2060 17.5 0.60 72 1.50 C Industry standard pinout 76615/1C 1CT:1CT 3200 45 2.00 52 1.00 2 D 500VDC Isolation 76616/3C 2CT:1CT 4350 23 3.00 35 1.00 Please note: For additional variants please see 786 series datasheet. PCB mounting UL 94 V-0 package materials ABSOLUTE MAXIMUM RATINGS Toroidal construction Operating free air temperature range 0C to 70C Storage temperature range -60C to 125C Fully encapsulated 1 SOLDERING INFORMATION DESCRIPTION Peak wave solder temperature 300C for 10 seconds The 766 Series is a range of general purpose Pin nish Matte tin with nickel pre-plate pulse transformers. Common applications include line coupling, impedance-matching, or isolating. 1 For further information, please visit www.murata-ps.com/rohs The devices can also be used in small isolated All specications typical at T =25C. A power supplies or as common-mode chokes in ltering applications. For full details go to www.murata-ps.com/rohs www.murata-ps.com/support KMP 766C D01 Page 1 of 3 Min. Primary Inductance Min. Primary Constant, ET Max. Leakage Inductance Max. Interwinding Capacitance Max. DC Resistance Max. Isolation Voltage Pin Connection Style Mechcanical Dimensions766 Series Pulse Transformers PACKAGE SPECIFICATIONS MECHANICAL DIMENSIONS 12 12.70 (0.500) Max. 12.70 (0.500) Max. 1 2 1 2 610 3 602 4 6C 1C 5 6 5 6 XYYWW XYYWW 0.560.05 (0.0220.002) 0.560.05 (0.0220.002) 10.16 (0.400) 10.16 (0.400) Unless otherwise stated all dimensions in mm (inches) 0.25 (0.01). All pins on a 2.54 (0.1) pitch and within 0.25 (0.01) of true position. Package Weight: 1.1g Typ. RECOMMENDED FOOTPRINT DETAILS TUBE DIMENSIONS 15.25 (0.60) 21.25 (0.84) 11.00+0.5-0.0 (0.433+0.02-0.0) Y )0-&4 6.9+0.5-0.0 (0.272+0.02-0.0) 0.500.15 (0.0200.006) Holes may be omitted for variants with fewer than 6 pins. Unless otherwise stated all dimensions in mm (inches) 0.25 (0.01). Tube length: 5202.0 (20.470.08) All pins on a 2.54 (0.1) pitch and within 0.25 (0.01) of true position. Unless otherwise stated all dimensions in mm (inches) 0.55 (0.022). www.murata-ps.com/support KMP 766C D01 Page 2 of 3 5.08 (0.200) 5.84 (0.230) 8.89 (0.350) Max. 2.54 (0.100) 10.00 (0.394) 6.35 (0.250) 5.84 (0.230) 2.54 (0.100) 8.89 (0.350) Max. 2.54 (0.100) 10.00 (0.394) 6.35 (0.250)