#A1313B-0031GRG=P3 Murata

Spec No.J(E)TE243C-0106-01 TYPE Reference Specification Sample Number A1313B-0029GGH=P3 *1 Physical Dimensions Marking 6.2 3.4 5.7 (0.6x1.1) 5.6 0.9 1.2 *1 Dimension of solder tip is not included. *2 Dimension of wiring part of terminal pin is not included. 0.3 mm Tolerance Unit Starting Torque 120 mNm () Connection(Bottom View) Turn 31 64 S Pin 5 1/2 3 1/2 Turns S 0.1-2UEW Wire Electrical Characteristics 100 MHz Using Frequency (C)( 3-1 ) 11.4 pF 3 100 MHz Range/Tolerance min/max(Measuring Frequency) ( 3-1 ) 7220 100 MHz Unloaded (Measuring Frequency) L inductance is conversion value, from C resonant capacitor. 1 Conversion formula L 2 (2F) C Resonant Capacitor F Using Frequency QC Consider nominal coil as a standard. Operating Temperature 4085 Standard Measurement Condition 5354585 202655 Unless otherwise specified, measurements are conducted under temperature at 5 to 35, humidity at 45 to 85%. If there is any doubt about the result, measurement shall be conducted under temperature at 202, humidity at 65 5. 5.6 0.15 max. 0.15 max. (3.10.1) 3.6 *2 0.60.15 Spec No.J(E)TE243C-0106-01 TYPE Reference Specification Sample Number A1313B-0030GRG=P3 *1 Physical Dimensions 6.2 Marking 3.4 5.7 (0.6x1.1) 5.6 0.9 1.2 *1 Dimension of solder tip is not included. *2 Dimension of wiring part of terminal pin is not included. 0.3 mm Tolerance Unit Starting Torque 120 mNm () Connection(Bottom View) Turn 31 35 51 64 Pin S 5 1/2 2 3/4 2 3/4 3 1/2 Turns S 0.07-2UEW Wire Electrical Characteristics 100 MHz Using Frequency (C)( 3-1 ) 11.4 pF +5/-2 100 MHz Range/Tolerance min/max(Measuring Frequency) ( 3-1 ) 6120 100 MHz Unloaded (Measuring Frequency) L inductance is conversion value, from C resonant capacitor. 1 Conversion formula L 2 (2F) C Resonant Capacitor F Using Frequency QC Consider nominal coil as a standard. Operating Temperature 4085 Standard Measurement Condition 5354585 202655 Unless otherwise specified, measurements are conducted under temperature at 5 to 35, humidity at 45 to 85%. If there is any doubt about the result, measurement shall be conducted under temperature at 202, humidity at 65 5. 5.6 0.15 max. 0.15 max. (3.10.1) 3.6 *2 0.60.15