#A915AY-100M=P3 Murata

Reference Only Spec No.J(E)TE243B-0046F-01 Type Reference Specifications D53LC Physical Dimensions () () Indicated of winging start(Black) Marking(Black) Tolerance 0.3 Unit mm Inductance ID 3 The nominal inductance value is identified by three digits. 1) 3 2 2 3 H 2 Three digits ID,First 2 digits indicate the effective inductance value The last digit indicates the number of0 following first 2 digits.The unit is H. 2) R 2 H R2 2 digits and letter ID,The unit is H. Letterrepresent the decimal point. Priority language Let a priority language be Japanese. MURATA MFG.CO., LTD. Reference Only Spec No.J(E)TE243B-0046F-01 D53LC Type (High current Type) Electrical specifications Inductance DC Nominal Tolerance Test Rated Current Rated Current Resistance Customer s Part No. Sample No. Based on Based on Value Freq. +20 Inductance Temperature -30 Change rise () kHz (m) (A) (Max.) (A) (Max.) A915AY-1R1M=P3 1.1 20 100 16 3.87 3.25 A915AY-2R0M=P3 2.0 20 100 22 2.92 2.64 A915AY-3R3M=P3 3.3 20 100 29 2.36 2.26 A915AY-4R7M=P3 4.7 20 100 38 1.87 2.01 A915AY-6R8M=P3 6.8 20 100 57 1.51 1.65 A915AY-100M=P3 10 20 100 75 1.33 1.41 A915AY-150M=P3 15 20 100 118 1.05 1.10 A915AY-220M=P3 22 20 100 173 0.86 0.81 A915AY-330M=P3 33 20 100 214 0.72 0.75 A915AY-470M=P3 47 20 100 293 0.62 0.64 A915AY-680M=P3 68 20 100 437 0.51 0.52 A915AY-101M=P3 100 20 100 667 0.43 0.44 * Unless otherwise specified, measurement is the standard atmospheric conditions. 1 LCR 4284A(KEYSIGHT) Inductance Measured with a LCR meter 4284A(KEYSIGHT) or equivalent. 2 TR6871 DC Resistance Measured with a digital multimeter TR6871(ADVANTEST) or equivalent. 3 Rated Current Value defined when DC current flows and Rated Current (Based on Inductance Change) or when current flows and Rated Current (Based on Temperature rise) whichever is smaller. 30% Rated Current The DC saturation allowable current value is specified when the decrease of the (Based on Inductance Change) initial inductance value at 30%. 40 Rated Current Rated Current (Based on Temperature rise) is specified when temperature of the (Based on Temperature rise) inductor on our PCB for test purpose is raised 40 by DC current. MURATA MFG.CO., LTD.