BLM03BD241SZ1D Murata

Reference Only Spec.No.JENF243A-9126L-01 P.1/9 Chip Ferrite Bead BLM03SZ1D Murata Standard Reference Specification AEC-Q200 1.Scope This reference specification applies to Chip Ferrite Bead BLM03 SZ series for Automotive Electronics based on AEC-Q200 except for Power train and Safety. 2.Part Numbering (ex.) BL M 03 AG 102 S Z 1 D (1) (2) (3) (4) (5) (6) (7) (8) (9) (1)Product ID (4)Characteristics (7)Category(for Automotive Electronics) (2)Type (5)Typical Impedance at 100MHz (8)Numbers of Circuit (3)Dimension (LW) (6)Performance (9)Packaging (D:Taping) 3.Rating DC Resistance ( max.) (*1) Rated (refer to below Impedance () Current comment) Customer MURATA (at 100MHz)(*1) ESD Rank (mA)*2 Remark Part Number Part Number (refer to below 2 :2kV Values comment) Initial After at at Values Testing 85C 125C BLM03AG100SZ1D 515 500 0.1 0.15 BLM03AG700SZ1D 40100 200 0.4 0.5 BLM03AG800SZ1D 8025% 200 0.4 0.5 BLM03AG121SZ1D 12025% 200 0.5 0.6 BLM03AG241SZ1D 24025% 200 0.8 0.9 BLM03AG601SZ1D 60025% 100 1.5 1.6 For BLM03AG102SZ1D 100025% 100 2.5 2.6 general use 515 BLM03AX100SZ1D 1000 0.05 0.10 8025% BLM03AX800SZ1D 500 0.18 0.23 12025% BLM03AX121SZ1D 450 0.23 0.28 24025% BLM03AX241SZ1D 350 0.38 0.43 60025% BLM03AX601SZ1D 250 0.85 0.90 BLM03AX102SZ1D 100025% 200 1.25 1.30 1025% BLM03BB100SZ1D 300 0.4 0.5 2225% BLM03BB220SZ1D 200 0.5 0.6 4725% BLM03BB470SZ1D 200 0.7 0.8 2 7525% BLM03BB750SZ1D 200 1.0 1.1 12025% BLM03BB121SZ1D 100 1.5 1.6 3325% BLM03BC330SZ1D 150 0.85 0.90 For high BLM03BC560SZ1D 5625% 100 1.05 1.10 speed signal Line BLM03BC800SZ1D 8025% 100 1.40 1.45 BLM03BD750SZ1D 7525% 300 0.4 0.5 BLM03BD121SZ1D 12025% 250 0.5 0.6 BLM03BD241SZ1D 24025% 200 0.8 0.9 BLM03BD471SZ1D 47025% 215 1.5 1.6 BLM03BD601SZ1D 60025% 200 1.7 1.8 BLM03PG220SZ1D 2225% 900 0.065 0.115 BLM03PG330SZ1D 3325% 750 0.09 0.140 *2 *2 1800 1450 0.040 0.045 BLM03PX220SZ1D 2225% For DC *2 *2 power Line BLM03PX330SZ1D 3325% 1500 1200 0.055 0.060 *2 *2 BLM03PX800SZ1D 8025% 1000 800 0.130 0.135 *2 *2 BLM03PX121SZ1D 12025% 900 700 0.160 0.210 Operating Temperature : -55C to +125C Storage Temperature : -55C to +125C MURATA MFG.CO.,LTD. Reference Only Spec.No.JENF243A-9126L-01 P.2/9 (*1) Standard Testing Conditions < Unless otherwise specified > < In case of doubt > Temperature : Ordinary Temp. (15 C to 35 C ) Temperature : 20C2 C Humidity : Ordinary Humidity (25%(RH) to 85%(RH)) Humidity : 60%(RH) to 70%(RH) Atmospheric pressure : 86kPa to 106kPa Rated current at 85C (*2) As for the Rated current marked with *2 Rated current at 125C Rated Current is derated as right figure Dependind on the operating temperature. 0 85 125 Operating Temperature (C) 4.Style and Dimensions 0.30.03 0.60.03 Equivalent Circuit Resistance element becomes 0.150.05 () dominant at high frequencies. :Electrode Unit Mass (Typical value) 0.3mg 5.Marking No marking. 6.Specifications 6-1.Electrical Performance No. Item Specification Test Method 6-1-1 Impedance Meet item 3. Measuring Frequency : 100MHz1MHz Measuring Equipment : KEYSIGHT4291A or the equivalent Test Fixture : KEYSIGHT16192A or the equivalent 6-1-2 DC Resistance Meet item 3. Measuring Equipment : Digital multi meter * Except resistance of the Substrate and Wire MURATA MFG.CO.,LTD. 0.30.03 Rated Current (A)