DAE0133V2NBC Murata

Aluminum electrolytic capacitors Snap-in capacitors Series/Type: B43545 Date: AUGUST 2018 EPCOS AG 2018. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company.Snap-in capacitors B43545 Outstanding ripple current, compact  105 C Long-life grade capacitors Applications Frequency converters Solar inverters Uninterruptible power supplies Professional power supplies Medical appliances Features Outstanding ripple current capability Base cooling available upon request for case sizes with diameters of 30 to 35 mm and lengths of 35 to 55 mm Long useful life Very high CV product, compact High reliability Extremely improved performance at high frequencies Outstanding low ESR at operating conditions above 50 C Optimized internal thermal resistance Capacitors with all insulation versions pass the needle flame test according to IEC 60695-11-5 for all flame exposure times up to 120 s RoHS-compatible Construction Charge/discharge-proof, polar Aluminum case, fully insulated with PET or PVC Version with additional PET insulation cap on terminal side available for insulating the capacitor from the PCB Snap-in solder pins to hold component in place on PC-board Minus pole marking on case surface Minus pole not insulated from case Overload protection by safety vent on the case wall Terminals Standard version with 2 terminals, 2 lengths available: 6.3 and 4.5 mm 3 terminals to ensure correct insertion: length 4.5 mm Please read Cautions and warnings and Page 2 of 18 Important notes at the end of this document.