DLW5ATZ501MQ2L Murata

Spec. No. JEFL243C-9109G-01 P 1/11 Wire Wound Chip Common Mode Choke Coil DLW5ATZMQ2 Murata Standard Reference Specification AEC-Q200 1. Scope This reference specification applies to Wire Wound Chip Common Mode Choke Coil DLW5ATZ MQ Series for Automotive Electronics based on AEC-Q200 except for Power train and Safety. 2. Part Numbering (ex.) DL W 5A T Z 111 M Q 2 L (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (6) Impedance (Typ. at 100MHz) (1) Chip Common Mode Choke Coil (7) Circuit (2) Structure (W : Winding Type) (8) Features (3) Dimension (LW) (9) Number of Line (4) Type (10) Packaging Code L : Taping (180mm/reel) (5) Category K : Taping (330mm/reel) B : Bulk 3.Rating Impedance Impedance DC at 10MHz, at 100MHz, Rated Withstanding Rated Insulation ESD Customer MURATA Resistance Under Standard Under Standard Voltage Voltage Current Resistance Rank Part Number Part Number (Rdc) Testing Conditions Testing Conditions V(DC) V(DC) (A) (M min.) 2.2kV ( max.) () (Typ.) DLW5ATZ500MQ2L DLW5ATZ500MQ2K 4.6min 50 4.0 0.013 DLW5ATZ500MQ2B DLW5ATZ151MQ2L DLW5ATZ151MQ2K 11min 150 3.0 0.020 DLW5ATZ151MQ2B DLW5ATZ331MQ2L DLW5ATZ331MQ2K 20min 330 100 250 2.5 0.027 10 2 DLW5ATZ331MQ2B DLW5ATZ501MQ2L DLW5ATZ501MQ2K 35min 500 2.0 0.034 DLW5ATZ501MQ2B DLW5ATZ112MQ2L DLW5ATZ112MQ2K 50min 1100 1.5 0.056 DLW5ATZ112MQ2B Operating Temperature : - 40 C to + 105 C Storage Temperature : - 40 C to + 105 C 4. Standard Testing Conditions < Unless otherwise specified > < In case of doubt > Temperature : Ordinary Temp. 15 C to 35 C Temperature : 20 C 2 C Humidity : Ordinary Humidity 25 %(RH) to 85 %(RH) Humidity : 60 %(RH) to 70 %(RH) Atmospheric pressure : 86 kPa to 106 kPa MURATA MFG CO., LTD. Spec. No. JEFL243C-9109G-01 P 2/11 5. Style and Dimensions 0.0.0.555 mimimin.n.n. (W)3(W)3(W)3.6.6.6000...333 (L)(L)(L)5.05.05.0000.3.3.3 ::: EEElelelectctctrrrooodddeee 1.1.1.333 1.1.1.333 000...333 000...333 0.0.0.999 in: mm 000...333 Equivalent Circuites Unit Mass (Typical value) 0.14g No polarity 6. Marking No marking. 7. Electrical Performance No. Item Specifications Test Method 7.1 Impedance Meet item 3. Measuring Equipment : KEYSIGHT 4191A or the ( Z ) (at 10MHz) equivalents. Measuring Frequency : 10MHz (ref. Item 9.) 7.2 Insulation Measuring Equipment : R8340A or the equivalents. Measuring voltage : 100V Resistance Time : within 60 s (ref. Item 9.) (I.R.) 7.3 DC Resistance Measuring Current : 100 mA max. (ref. Item 9.) (Rdc) (In case of doubt in the above mentioned standard condition,measure by 4 terminal method.) 7.4 Withstanding Products shall not be damaged. Test Voltage : 250 V(DC) Voltage Time : 1 to 5 seconds Charge Current : 1 mA max. (ref. Item 9.) MURATA MFG CO., LTD. 1.1.1.777 1.1.1.333 1.1.1.777 000...333 000...333 000...333 0.0.0.0.45454545 mimimimin.n.n.n. (T(T(T)2)2)2...2220000.0.0.151515