DLW5BTH101TQ2L Murata

Reference Only Spec. No. JEFL243C-9120A-01 P 1/10 Wire Wound Chip Common Mode Choke Coil DLW5BTHTQ2 Murata Standard Reference Specification AEC-Q200 1. Scope This reference specification applies to Wire Wound Chip Common Mode Choke Coil DLW5BTH TQ Series for Automotive Electronics based on AEC-Q200. 2. Part Numbering (ex.) DL W 5B T H 102 T Q 2 L (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (6) Impedance (Typ. at 100MHz) (1) Chip Common Mode Choke Coil (7) Circuit (2) Structure (W : Winding Type) (8) Features (3) Dimension (LW) (9) Number of Line (4) Type (10) Packaging Code L : Taping (180mm/reel) (5) Category K : Taping (330mm/reel) B : Bulk 3.Rating Impedance Impedance Rated DC Current(*) at 10MHz, at 100MHz, Rated Withstanding Insulation ESD Customer MURATA Resistance (A) Under Standard Under Standard Voltage Voltage Resistance Rank Part Number Part Number (Rdc) Tesiting Conditions Tesiting Conditions V(DC) V(DC) (M min.) 2.2kV at at (max.) ( min.) ( Typ.) 105 125 DLW5BTH101TQ2L DLW5BTH101TQ2K 10 100 4.0 2.5 0.013 DLW5BTH101TQ2B DLW5BTH251TQ2L DLW5BTH251TQ2K 20 250 3.0 2.0 0.020 DLW5BTH251TQ2B DLW5BTH501TQ2L DLW5BTH501TQ2K 30 500 50 125 2.5 1.5 0.027 10 2 DLW5BTH501TQ2B DLW5BTH102TQ2L DLW5BTH102TQ2K 60 1000 2.0 1.2 0.034 DLW5BTH102TQ2B DLW5BTH142TQ2L DLW5BTH142TQ2K 100 1400 1.5 1.0 0.056 DLW5BTH142TQ2B (*)As for DLW5BTH TQ type Rated Current is derated as following figure depending on the operating temperature. Rated Current at 105 Rated Current at 125 125 105 Operating Temperature (Ambient temperature) Operating Temperature : - 40 C to + 125 C Storage Temperature : - 40 C to + 125 C MURATA MFG CO., LTD. Rated Current A Reference Only Spec. No. JEFL243C-9120A-01 P 2/10 4. Standard Testing Conditions < Unless otherwise specified > < In case of doubt > Temperature : Ordinary Temp. 15 C to 35 C Temperature : 20 C 2 C Humidity : Ordinary Humidity 25 %(RH) to 85 %(RH) Humidity : 60 %(RH) to 70 %(RH) Atmospheric pressure : 86 kPa to 106 kPa 5. Style and Dimensions 0.50.3 (TOP) 3.00.5 0.5 Unit Mass (Typical value) 3.60.3 m in. 0.21g (L)5.00.3 (W)5.00.3 Equivalent Circuites : Marking : Electrode in: mm 1.3 1.3 0.3 0.3 0.9 No polarity 0.3 Top of the tape Tape Sprocket Hole 6. Marking marking DLW5BT 7. Electrical Performance No. Item Specifications Test Method 7.1 Impedance Meet item 3. Measuring Equipment : KEYSIGHT 4191A or the ( Z ) (at 10MHz) equivalents. Measuring Frequency : 10MHz (ref. Item 9.) 7.2 Insulation Measuring Equipment : R8340A or the equivalents. Measuring voltage : Rated Voltage Resistance Time : within 60 s (ref. Item 9.) (I.R.) 7.3 DC Resistance Measuring Current : 100 mA max. (ref. Item 9.) (Rdc) (In case of doubt in the above mentioned standard condition,measure by 4 terminal method.) MURATA MFG CO., LTD. 1.7 1.3 1.7 0.3 0.3 0.3 0.45min. 2.350.15