DSM/DWR Models www.murata-ps.com Dual Output, 3.3V and 5V, 15Watt DC/DC Converters FEATURES Regulated 5V and 3.3V outputs 5V 2.65Amps/3.3V 3 Amps capability Typical units 15 Watts total output power 1 x 2 SMT or through-hole package Available input voltage ranges: 10-18V, 18-36V or 36-75V No-load stable operation UL/EN60950-1 safety approvals PRODUCT OVERVIEW mark available (75V-input models) For surface mount or through-hole applications requiring 15 Watts of power from 5V and 3.3V, DATEL Continuous short-circuit protection offers a new power sharing DC/DC converter capable of meeting your output current requirements. The DSM/DWR series is available with three different input voltage ranges: 36-75V input (D48), 18-36V input Fully isolated, 1500Vdc guaranteed (D24) or 10-18V input (D12). These converters are fully isolated and capable of delivering any combina- 40 to +100C operating temperature tion of 5V and 3.3V output current up to a combined total of 15 Watts of output power. Input under and overvoltage shutdown Housed in 1 x 2 metal packages coated with electrically non-conductive nish, DSM/DWR convert- Output OVP, thermal shutdown ers are regulated by a 3.3V control loop that provides load regulation of 0.5% for 3.3V output and 1.5% for 5V output. All models include input ltering, input overvoltage and undervoltage shutdown circuitry, output short- circuit and current-limiting protection, and thermal shutdown. All models provide trim capability and an on/off control function. Fully synchronous output recti cation provides high ef ciency (86%) and a stable output under no-load conditions. DSM/DWR power sharing modules offer low output ripple and noise performance, 1500 Vdc isolation voltage, and are fully speci ed for 40 to +100C operation. These devices meet IEC950, UL1950 and EN60950-1 safety standards.D48 models are CE marked (meets LVD requirements). SIMPLIFIED SCHEMATIC +INPUT +5V OUTPUT (5) (1) SWITCH CONTROL +3.3V OUTPUT (8) INPUT (2) OUTPUT RETURN ON/OFF (7) PWM CONTROL CONTROLLER (3) OPTO REFERENCE & ISOLATION ERROR AMP UV & OV THERMAL COMPARATORS SHUTDOWN TRIM (9) Figure 1. Simpli ed Schematic Typical topology is shown. For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC DSM/DWR Models.D03 Page 1 of 9DSM/DWR Models Dual Output, 3.3V and 5V, 15Watt DC/DC Converters Performance Speci cations and Ordering Guide Output Input Package R/N (mVp-p) Regulation (Max.) Ef ciency VOUT IOUT VIN Nom. Range IIN (Case, Model (Volts) (Amps) Typ. Max. Line Load (Volts) (Volts) (mA) Min. Typ. Pinout) 5 2.65 40 75 1% 1.5% DSM-5/2.65-3.3/3-D12-C C18A, P36 12 10-18 60/1450 83% 86% DWR-5/2.65-3.3/3-D12-C C34, P36 3.3 3 60 100 0.5% 0.5% 5 2.65 40 75 1% 1.5% DSM-5/2.65-3.3/3-D24-C C18A, P36 24 18-36 35/730 83% 85% DWR-5/2.65-3.3/3-D24-C C34, P36 3.3 3 60 100 0.5% 0.5% 5 2.65 40 75 1% 1.5% DSM-5/2.65-3.3/3-D48-C C18A, P36 48 36-75 20/370 83% 85% DWR-5/2.65-3.3/3-D48-C C34, P36 3.3 3 60 100 0.5% 0.5% Typical at TA = +25C under nominal line voltage and balancedfull-loa conditions (5V 1.5A/3.3V 2.25A). Tested from 250mA to 100% full load (other output at 250mA load). Nominal line voltage, no load/balanced full-power condition. Any combination of 5V/3.3V rated IOUT current, not to exceed 15 Watts of output power. (See derating graphs.) Ripple/Noise (R/N) measured over a 20MHz bandwidth. All models are speci ed with 0.47F ceramic in parallel with 100F tantalum output capacitors. PART NUMBER STRUCTURE DSM - 5 / 2.65 - 3.3 / 3 - D48 LX - C Optional Functions Dual Output: RoHS-6 compliant DSM/DWR 15 Watt DC/DC s are designed with an On/Off Control DSM: Surface-Mount Series function, with positive polarity in the pin 3 position. (Selective soldering only) DWR See Optional Functions DWR: Through-Hole Series Blank = On/Off Control function (positive polarity) on pin 3models only Input Voltage Range: V1 Nominal Output Voltage: L1 = Pin length: 0.110 inches (2.79mm) 0.010 D12 = 10-18 Volts (12V nominal) 5 Volts L2 = Pin length: 0.145 inches (3.68mm) 0.010 D24 = 18-36 Volts (24V nominal) I1 Maximum Output Current: D48 = 36-75 Volts (48V nominal) Special quantity order is required samples available with 2.65 Amps I2 Maximum Output Current: standard pin length only. V2 Nominal Output Voltage: 3 Amps SMT (M) versions not available in sample quantities. 3.3 Volts Some model number combinations may not be available. See website or contact your local Murata sales representative. MECHANICAL SPECIFICATIONS I/O Connections Pin Function P36 1 +Input 2 Input 3 On/Off Control 0.100 0.110 2.00 0.03 (2.54) (2.79) (50.80) 4 Case 5 +5V Output 4 9 Case C34 METAL CASE 0.45 6 NC 8 (11.43) 0.800 DWR Models 3 7 Output Return Case C18A (20.32) 1.00 0.03 7 4 EQ. SP. (25.40) 2 8 +3.3V Output 0.500 DSM Models INSULATED PAD 0.200 (5.08) 0.300 (12.70) 6 9 Trim (7.62) 0.040 0.001 DIA. 1 5 (1.016 0.025) 0.20 MIN TOP VIEW (5.08) Dimensions are in inches (mm) shown for ref. only. 1.800 0.10 0.10 (45.72) (2.54) (2.54) Third Angle Projection 2.00 0.03 1 5 0.110 (50.80) 0.300 0.200 (2.79) (7.62) 6 2 (5.08) 0.800 (20.32) 1.00 0.03 0.015 0.060 7 4 EQ. SP. 3 (25.40) 0.52 (0.38) (1.52) 0.200 (10.16) 8 (13.21) Tolerances (unless otherwise specied): 4 .XX 0.02 (0.5) 9 .XXX 0.010 (0.25) INSULATED BASE Angles 2 BOTTOM VIEW 0.015 0.055 0.10 METAL CASE Components are shown for reference only. (0.38) (1.40) (2.54) www.murata-ps.com/support MDC DSM/DWR Models.D03 Page 2 of 9