FDSD0630-H-1R0M=P3 Murata

1/13 Spec No.J(E)TE243B-0007F-01 Reference Specifications Type FDSD0630 Physical dimensions Lot No. Inductance Code (See the Next page ) Tolerance : 0.3 Unit : mm Inductance ID 3 The nominal inductance value is identified by three digits. 1) 3 2 2 3 H 2 Three digits ID,First 2 digits indicate the effective inductance value The last digit indicates the number of0 following first 2 digits.The unit is H. 2) R 2 H R2 2 digits and letter ID,The unit is H. Letterrepresent the decimal point. Priority language Let a priority language be Japanese. MURATA MFG.CO., LTD.Spec No.J(E)TE243B-0007F-0 1 FDSD0630 Type Electrical specifications Inductance DC Rated Current Rated Current Nominal Tolerance Test Resistance Based on Based on Stamp Customer s Part No. Part No. Value Freq. Inductance Change Temperature rise Code () kHz (m) (Max.) (A) (Max.) (A) (Max.) FDSD0630-H-R68M=P3 0.68 20 100 8.6 17 9.6 R68 FDSD0630-H-1R0M=P3 1.0 20 100 11 15 9.4 1R0 FDSD0630-H-1R0MB=P3 1.0 20 100 7.81 13.4 10.2 1R0B FDSD0630-H-1R5N=P3 1.5 30 100 13 13 8.5 1R5 FDSD0630-H-2R2M=P3 2.2 20 100 17 12 7.1 2R2 FDSD0630-H-3R3M=P3 3.3 20 100 28 8.0 5.6 3R3 FDSD0630-H-4R7M=P3 4.7 20 100 40 7.6 4.7 4R7 FDSD0630-H-5R6M=P3 5.6 20 100 46 7.0 4.2 5R6 FDSD0630-H-6R8M=P3 6.8 20 100 61 5.9 3.7 6R8 FDSD0630-H-8R2M=P3 8.2 20 100 70 5.5 3.4 8R2 FDSD0630-H-100M=P3 10 20 100 74 5.4 3.2 100 1 LCR 4284AKEYSIGHT 100kHz 0.5V Inductance Measured with a LCR meter 4284A(KEYSIGHT) or equivalent.Test Freq. 100kHzLevel 0.5V measurement point 2 34420AKEYSIGHT3541(HIOKI) DC Resistance (Picture-1 Measured with a Micro ohm meter 34420A(KEYSIGHT) or 3541(HIOKI) or equivalent. The measurement point of DCR is side of terminal. (refer to the Picture-1) Picture-1 3 Rated Current Value defined when DC current flows and Rated Current (Based on Inductance change) or when DC current flows and Rated Current (Based on Temperature rise) whichever is smaller. 30% Rated Current The saturation allowable DC current value is specified when the decrease of the initial Inductance value at 30%. (Based on Inductance change) 40 Rated Current Rated Current (Based on Temperature rise) is specified when temperature of the inductor on our PCB for test purpose is raised 40 by DC current. (Based on Temperature rise) 4 30V DC * Absolute maximum voltage Absolute maximumvoltage30 DC. Unless otherwise specified, measurement is the standard atmospheric conditions. MURATA MFG.CO., LTD.