C03E.pdf
Sep 23,2016
Chip Monolithic Ceramic Capacitors
for Automotive
2016 Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note C03E.pdf
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep 23,2016
Explanation of Symbols in This Catalog
Links are provided to the latest information from the PDF version of the catalog, which is available on the web.
WEB
No DC bias characteristics
For applications that do not require a particular
Polymer capacitor is no capacitance change with DC bias
reliability. such as general equipment.
due to aluminum oxidized lm for dielectric.
Infotainment for Automotive
Low-inductance product suitable for noise suppression.
The product for entertainment equipment like car
This product has extremely low ESL and is suitable for
navigations, car audios, and body control equipment
suppression of noise, including high frequencies.
like wipers, power windows.
This product can also be used as a low-ESL,
high-performance bypass capacitor.
Powertrain/Safety for Automotive
Products use for applications (running, turning,
Limited to Conductive Glue Mounting
stopping, and safety devices) that particularly concern
Since silver palladium is used for the external
human life, such as in devices for automotive.
electrodes,the capacitor can be mounted by conductive
adhesive.
Medical-grade products for Implanted Medical Devices
These products are intended for use in implanted
Derating 1
medical devices such as cardiac pacemakers, cochlear
This product is suitable when a voltage continuously
implants, insulin pumps, and gastric electrostimulators.
applied to a capacitor in an operating circuit, is used
*1
They are suitable for use in non-critical circuits.
below (derated) the rated voltage of the capacitor. This
*1
Non-critical circuits
model guarantees the test conditions in the endurance
This term refers to circuits in implanted medical
test, at a rated voltage x 100% at the maximum
devices that are not directly linked to life support, i.e.
operating temperature. A reliability assurance level
circuits that will not directly endanger the life of the
equivalent to a common product can be secured, by
patient should the functionality of the device be
using this product within the voltage and temperature
reduced or halted by failure of the circuit.
derated conditions recommended in the gure below.
Recommended Conditions of the Derating Operating Voltage and Temperature
AEC-Q200 compliant product
120
100
125C Type
Safety Standard Certied Product
80
105C Type
Products that acquired safety standard certication
85C Type
IEC60384-14 and products based on the Electrical
60
Appliance and Material Safety Law of Japan.
40
Low dissipation for high frequency
20
By devising ceramic materials and electrode materials,
0
low dissipation is achieved in frequency bands of VHF,
025 50 75 100 125 150
UHF, and microwave or beyond.
Product Temperature (C)
Low inductance Derating 2
This capacitor is designed so that the parasitic When the product temperature exceeds 105C, please
inductance component (ESL) that the capacitor has on use this product within the voltage and temperature
the high frequency side becomes lower. derated conditions in the gure below.
700
Fail safe product
Rated Voltage 630V
This capacitor is designed to prevent failures as much
600
as possible by short mode.
500
Product resistant to deection cracking
(450V)
Rated Voltage 450V
This capacitor is designed to prevent failures as much
400
as possible by short mode caused by cracking when (350V)
there is board deection.
300
Product with solder cracking suppression 200
This capacitor is congured with metal terminals and
100
leads connected to the chip. The metal terminals and
leads relieve the stress from expansion and contraction
0
of the solder, to suppress solder cracking.
025 50 75 100 125 150
Product Temperature (C)
Product suitable for acoustic noise reduction and low
distortion Derating 3
This product suppresses acoustic noise, which occurs Please apply the derating curve according to the
when a ceramic capacitor is used, by devising the operating temperature.
materials and conguration. Please refer to detailed specications sheet for details.
EU RoHS Compliant
All the products in this catalog comply with EU RoHS.
EU RoHS isthe European Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
For more details, please refer to our website 'Murata's Approach for EU RoHS' (