LAST TIME BUY: AUGUST 31, 2014. CLICK HERE FOR OBSOLESCENCE NOTICE OF FEBRUARY 2014. * HPR1XXC Series www.murata-ps.com 0.75 Watt Single Output DC/DC Converters FEATURES LoLow w CostCoost MuMultiple Pltiplee Pacackakagege Styles Styles NOT RECOMMENDED InInternal Input and Outputternala Input and Output ThThe HPR1XXC Series uses advanced circuit design and packaging technology to deliver superior reliability and e HPH R1XXC Seeries uses addvancee FFiilteringlteringg FOR NEW DESIGNS peperformance. A 170kHz push-pull oscillator is used in the input stage. Beat-frequency oscillation problems are rforo mance. A 1170kHz pushh-pull rereduced when using the HPR1XXC Series with high frequency isolation ampliducec d when usis ng the HPRR1XXC ers. Non-Conductive CaseNon-Coonductive CCase Reduced parts count and high ef ciency add to the reliability of the HPR1XXC Series. The high ef ciency of the High Output Power Density: HPR1XXC Series means less internal power dissipation, as low as 190mW. 3 10 Watts/Inch With reduced heat dissipation the HPR1XXC Series can operate at higher temperatures with no degradation. In Extended Temperature Range: addition, the high ef ciency of the HPR1XXC Series means the series is able to offer greater than 10 W/inch3 of output power density. Operation down to no load will not impact the reliability of the series, although a >1mA -25C to +85C minimum load is needed to realize published speci cations. Ef ciency to 79% The HPR1XXC Series provides the user a low cost converter without sacri cing reliability. The use of surface mounted RoHS Compliant devices and advanced manufacturing technologies make it possible to offer premium performance and low cost. As of September 2014, ONLY the following part numbers will be available: HPR100C HPR102C HPR103C HPR104C HPR105C HPR106C HPR107C HPR110C HPR116C HPR117C HPR118C HPR120C SPECIFICATIONS All speci cations are typical at T = +25C nominal input voltage unless otherwise speci ed. A PRODUCT SELECTION CHART Nominal Input Rated Output Rated Output Input Current Re ected Ripple Ef ciency Voltage Voltage Current Current Model Recommended Alternatives No Load Rated Load VDC VDC mA mA mAp-p % HPR100C 5 5 150 20 216 10 69 NMR100C / MER1S0505SC OBSOLETE HPR101C 5 12 62 20 212 5 70 NMR101C / MER1S0512SC * HPR102C 5 15 50 20 212 5 71 NMR102C / MER1S0515SC HPR103C 5 5 75 20 218 5 68 NMA0505SC / MEA1D0505SC HPR104C 5 12 30 20 212 5 68 NMA0512SC / MEA1D0512SC HPR105C 5 15 25 20 200 5 75 NMA0515SC / MEA1D0515SC HPR106C 12 5 150 10 90 5 69 NMR106C / MER1S1205SC HPR107C 12 12 62 10 81 5 77 NMR107C / MER1S1212SC HPR110C 12 12 30 10 81 5 74 NMA1212SC / MEA1D1212SC OBSOLETE HPR111C 12 15 25 10 81 5 77 NMA1215SC / MEA1D1215SC * OBSOLETE HPR112C 15 5 150 8 72 5 69 MER1S1505SC * OBSOLETE HPR113C 15 12 62 8 72 5 69 MER1S1512SC * HPR116C 15 12 30 8 63 5 76 MEA1D1512SC HPR117C 15 15 25 8 63 5 79 MEA1D1515SC HPR118C 24 5 150 8 48 15 65 MER1S2405SC HPR120C 24 15 50 8 45 15 76 MER1S2415SC OBSOLETE HPR122C 24 12 30 8 45 15 67 MEA1D2412SC * OBSOLETE HPR123C 24 15 25 8 45 15 69 MEA1D2415SC * HPR108C 12 15 50 10 81 5 77 NMR108C / MER1S1215SC HPR109C 12 5 75 10 88 5 71 NMA1205SC / MEA1D1205SC HPR114C 15 15 50 8 72 5 69 MER1S1515SC HPR115C 15 5 75 8 72 5 69 MEA1D1505SC HPR119C 24 12 62 8 48 15 65 MER1S2412SC HPR121C 24 5 75 8 45 15 69 MEA1D2405SC LAST TIME BUY: AUGUST 31, 2014. CLICK HERE FOR OBSOLESCENCE NOTICE OF FEBRUARY 2014. * For full details go to www.murata-ps.com/rohs www.murata-ps.com/support TDC HPR1xxC.D01 Page 1 of 4 OBSOLETE NOT RECOMMENDED FOR NEW DESIGNSHPR1XXC Series 0.75 Watt Single Output DC/DC Converters SPECIFICATIONS, ALL MODELS Speci cations are at T = +25C nominal input voltage unless otherwise speci ed. A PARAMETER CONDITIONS MIN TYP MAX UNITS INPUT Voltage Range 4.5 5 5.5 VDC 10.8 12 13.2 VDC 13.5 15 16.5 VDC 21.6 24 26.4 VDC Voltage Rise Time See Typical Performance Curves & Application Notes: Capacitive Loading Effects on Start-Up of DC/DC Converters OUTPUT Rated Power 750 mW Voltage Setpoint Accuracy Rated Load, Nominal V 5 % IN Ripple & Noise BW = DC to 10MHz 150 200 mVp-p BW =10Hz to 2MHz 30 40 mVrms Voltage (Over Input Voltage Range) 1mA to Rated Current, V = 5V 4.75 7 VDC OUT 1mA to Rated Current, V = 12V 11.40 15 VDC OUT 1mA to Rated Current, V = 15V 14.25 18 VDC OUT Temperature Coef cent .01 .05 %/ C REGULATION Load Regulation (All other modes) Rated Load to 1mA Load 3 % GENERAL ISOLATION Rated Voltage 750 VDC Test Voltage 60 Hz, 10 Seconds 750 Vrms Resistance 10 G Capacitance 25 100 pF Leakage Current V = 240VAC, 60Hz 2 8.5 Arms ISO Switching Frequency 170 kHz Frequency Change Over Line and Load 24 % Package Weight 3 g MTTF per MIL-HDBK-217, Rev. F* Circuit Stress Method Ground Benign T = +25C 7.9 MHr A Fixed Ground T = +35C 1.9 MHr A Naval Sheltered T = +35C 1.2 MHr A Airborne Uninhabited Fighter T = +35C 300 kHr A TEMPERATURE Speci cation -25 +25 +85 C Operation -40 +100 C Storage -40 +110 C SOLDERING INFORMATION The HPR1XXC devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the devices plastic body will not be compromised and internal temperatures within the converter will not exceed 175C. Care should be taken to control manual soldering limits identical to that of wave soldering. www.murata-ps.com/support TDC HPR1xxC.D01 Page 2 of 4 GENERAL OUTPUT INPUT