LQH2HPZ3R3MGRL Murata

Spec No.: JELF243A 9128G-01 P1/8 CHIP COILS (CHIP INDUCTORS) LQH2HPZGR Murata Standard Reference Specification AEC-Q200 1. Scope This reference specification applies to chip coils (chip inductors) LQH2HPZ GR series for automotive electronics based on AEC-Q200 except for power trains and safeties. 2. Part Numbering (Ex.) LQ H 2H P Z 1R0 M G R L Product ID Structure Dimension Application and Category Inductance Tolerance Dimension Other Packaging (L W) characteristic (T) L: 180 taping *B: bulk *B: Bulk packing is also available. 3. Part Number and Rating Operating temperature range (ambient temperature not including self-temperature rise) -40C to +105C (product temperature including self-temperature rise) -40C to +125C Storage temperature range -40C to +125C Rated current Inductance *3 (mA) Self-resonant Based on temperature Customer Murata DC resistance ESD *2 frequency rise Nominal Based on Part number Part number () 5 A: 8 kV Tolerance (MHz min.) value inductance Ambient Ambient (%) *1 (H) change temperature temperature 85C 105C LQH2HPZR47MGRL 0.47 20 0.04520% 120 2900 2520 1470 5A LQH2HPZR68MGRL 0.68 20 0.05520% 110 2430 2330 1350 5A LQH2HPZ1R0MGRL 1.0 20 0.06820% 100 2130 2100 1200 5A LQH2HPZ1R5MGRL 1.5 20 0.08720% 90 1700 1850 1110 5A LQH2HPZ2R2MGRL 2.2 20 0.13420% 80 1550 1470 850 5A LQH2HPZ3R3MGRL 3.3 20 0.22520% 70 1230 1100 660 5A LQH2HPZ4R7MGRL 4.7 20 0.30020% 50 1090 1000 570 5A LQH2HPZ6R8MGRL 6.8 20 0.39520% 40 830 860 490 5A LQH2HPZ100MGRL 10 20 0.56020% 30 700 710 430 5A LQH2HPZ150MGRL 15 20 0.92520% 20 570 560 310 5A LQH2HPZ220MGRL 22 20 1.36020% 15 460 430 250 5A *1 When rated current is applied to the products, inductance will be within 30% of initial inductance value range. *2 When rated current is applied to the products, temperature rise caused by self-generated heat shall be limited to 40C max (ambient temperature 85C max). When rated current is applied to the products, temperature rise caused by self-generated heat shall be limited to 20C max (ambient temperature 85C to 105C). *3 Keep the temperature (ambient temperature plus self-generation of heat) under 125C. 4. Testing Conditions Unless otherwise specified Temperature: ordinary temperature (15C to 35C) Humidity: ordinary humidity 25% to 85% (RH) In case of doubt Temperature: 20C2C Humidity: 60% to 70% (RH) Atmospheric pressure: 86 kPa to 106 kPa MURATA MFG CO., LTD Spec No.: JELF243A 9128G-01 P2/8 5. Appearance and Dimensions Unit mass (typical value): 0.019 g 6. Marking No marking. 7. Electrical Performance No. Item Specification Test method 7.1 Inductance Meet chapter 3 ratings. Measuring equipment: Keysight 4192A or the equivalent Measuring frequency: 1 MHz 7.2 DC resistance Meet chapter 3 ratings. Measuring equipment: digital multimeter 7.3 Self-resonant Meet chapter 3 ratings. Measuring equipment: Keysight E4991A or the frequency equivalent 8. AEC-Q200 Requirement 8.1 Performance based on table 5 for magnetics (inductors/transformer) AEC-Q200 Rev. D issued June 1, 2010 AEC-Q200 Murata specification/deviation No. Stress Test method 3 High 1000 h at 125C Meet table A after testing. temperature Set for 24 h at room condition, then Table A exposure measured. Appearance No damage Inductance change (at 1 MHz) Within 10% DC resistance change Within 10% 4 Temperature 1000 cycles Meet table A after testing. cycling -40C to +105C Set for 24 h at room condition, then measured. 7 Biased humidity 1000 h at 85C, 85% (RH). Unpowered. Meet table A after testing. 8 Operational life Apply rated current 85C 1000 h Meet table A after testing. Set for 24 h at room condition, then measured. 9 External visual Visual inspection No abnormalities 10 Physical Meet chapter 5,Appearance and No defects dimension Dimension. MURATA MFG CO., LTD