LQH32NZ100J23L Murata

Reference Only SpecNo.JELF243A-9144C-01 P1/8 CHIP COILCHIP INDUCTORSLQH32NZ23L Murata Standard Reference SpecificationAEC-Q200 1. Scope This reference specification applies to Wire Wound Chip Coil (Chip Inductors) LQH32NZ Series for Automotive Electronics based on AEC-Q200 except for Power train and Safety. 2. Part Numbering (ex) LQ H 32 N Z 1R0 K 2 3 L Product ID Structure Dimension Applications Category Inductance Tolerance Features Electrode Packaging (LW) and L:Taping Characteristics 3. Rating Operating Temperature Range. -40 to +105C Storage Temperature Range. -40 to +105C Self Inductance DC Rated Customers MURATA Q Resonant ESD Resistance Current Part Number Part Number Tolerance (min.) Frequency 5A : 8kV (H) ( max.) (mA) (MHz min.) (%) LQH32NZ1R0K23L 1.0 0.5 445 100 LQH32NZ1R2K23L 1.2 425 0.6 LQH32NZ1R5K23L 1.5 75 400 LQH32NZ1R8K23L 1.8 0.7 60 390 LQH32NZ2R2K23L 2.2 0.8 50 370 LQH32NZ2R7K23L 2.7 0.9 43 320 K:10 20 LQH32NZ3R3K23L 3.3 1.0 38 300 LQH32NZ3R9K23L 3.9 1.1 35 290 LQH32NZ4R7K23L 4.7 1.2 31 270 LQH32NZ5R6K23L 5.6 1.3 28 250 LQH32NZ6R8K23L 6.8 1.5 25 240 LQH32NZ8R2K23L 8.2 1.6 23 225 LQH32NZ100J23L 10 1.8 20 190 LQH32NZ120J23L 12 2.0 18 180 LQH32NZ150J23L 15 2.2 16 170 35 LQH32NZ180J23L 18 2.5 15 165 LQH32NZ220J23L 22 2.8 14 150 5A LQH32NZ270J23L 27 3.1 13 125 LQH32NZ330J23L 33 3.5 12 115 LQH32NZ390J23L 39 3.9 110 11 LQH32NZ470J23L 47 4.3 100 LQH32NZ560J23L 56 4.9 10 85 LQH32NZ680J23L 68 J: 5 5.5 9.0 80 LQH32NZ820J23L 82 6.2 8.5 70 LQH32NZ101J23L 100 40 7.0 8.0 80 LQH32NZ121J23L 120 8.0 7.5 75 LQH32NZ151J23L 150 9.3 7.0 70 LQH32NZ181J23L 180 10.2 6.0 LQH32NZ221J23L 220 11.8 5.5 65 LQH32NZ271J23L 270 12.5 LQH32NZ331J23L 330 13.0 5.0 LQH32NZ391J23L 390 22.0 50 50 LQH32NZ471J23L 470 25.0 45 MURATA MFG.CO., LTD Reference Only SpecNo.JELF243A-9144C-01 P2/8 4. Testing Conditions Unless otherwise specified In case of doubt Temperature : Ordinary Temperature (15 to 35C) Temperature : 20 2C Humidity : Ordinary Humidity (25 to 85 %(RH)) Humidity : 60 to 70 %(RH) Atmospheric Pressure : 86 to 106 kPa 5. Appearance and Dimensions (No marking) No Marking. (in mm) Unit Mass (Typical value) 0.060g 6. Electrical Performance No. Item Specification Test Method 6.1 Inductance Inductance shall meet item 3. Measuring EquipmentKEYSIGHT 4192A or equivalent Measuring Frequency1MHz/ 1.0 to 390 H 1kH / 470H 6.2 Q Measuring EquipmentKEYSIGHT 4192A or equivalent Measuring Frequency1MHz/ 1.0 to 82 H 796kHz / 100 to 470 H 6.2 DC Resistance DC Resistance shall meet item 3. Measuring EquipmentDigital multi meter 6.3 Self Resonant S.R.F shall meet item 3. Measuring EquipmentKEYSIGHT E4991A or equivalent Frequency(S.R.F) 6.4 Rated Current Self temperaturer rise shall be The rated current is applied. limited to 20C max. Inductance Changewithin 10% 7. AEC-Q200 Requirement 7.1 Performance (based on Table 5 for Magnetics(Inductors / Transformer) AEC-Q200 Rev.D issued June. 1 2010 AEC-Q200 Murata Specification / Deviation No Stress Test Method 3 High 1000hours at 105 deg C Meet Table A after testing. Temperature Set for 24hours at room temperature, Table A Exposure then measured. Appearance No damage Inductance change Within 10% 4 Temperature Cycling 1000cycles Meet Table A after testing. -40 deg C to + 105deg C Set for 24hours at room temperature,then measured. MURATA MFG.CO., LTD