LQH32PN100MNCL Murata

Spec No.: JELF243A 0091H-01 P1/9 CHIP COILS (CHIP INDUCTORS) LQH32PNNC REFERENCE SPECIFICATION 1. Scope This reference specification applies to chip coils (chip inductors) LQH32PN NC series for general electronic equipment. 2. Part Numbering (Ex.) LQ H 32 P N 1R0 N N C L Product ID Structure Dimension Application and Category Inductance Tolerance Dimension Other Packaging (L W) characteristic (T) L: 180 taping *B: bulk *B: Bulk packing is also available. 3. Part Number and Rating Operating temperature range (ambient temperature not including self-temperature rise) -40C to +85C (product temperature including self-temperature rise) -40C to +125C Storage temperature range -40C to +125C Rated current Inductance *3 (mA) DC Self-resonant Customer Murata resistance frequency Nominal Based on Based on Part number Part number Tolerance () (MHz min.) value inductance temperature (%) *1 *2 ( H) change rise LQH32PNR47NNCL 0.47 N: 30 0.02420% 100 4400 2900 LQH32PN1R0NNCL 1.0 N: 30 0.03620% 100 3000 2500 LQH32PN1R5NNCL 1.5 N: 30 0.05320% 70 2600 2100 LQH32PN2R2NNCL 2.2 N: 30 0.06420% 70 2000 1850 LQH32PN3R3NNCL 3.3 N: 30 0.10020% 50 1900 1550 LQH32PN4R7NNCL 4.7 N: 30 0.15520% 40 1600 1200 LQH32PN6R8NNCL 6.8 N: 30 0.22020% 40 1300 1100 LQH32PN100MNCL 10 M: 20 0.29520% 30 1000 900 LQH32PN150MNCL 15 M: 20 0.47520% 20 800 700 LQH32PN220MNCL 22 M: 20 0.68520% 20 650 550 *1 When rated current is applied to the products, inductance will be within 30% of nominal inductance value. *2 When rated current is applied to the products, temperature rise caused by self-generated heat shall be limited to 40C max. *3 Keep the temperature (ambient temperature plus self-generation of heat) under 125C. 4. Testing Conditions Unless otherwise specified Temperature: ordinary temperature (15C to 35C) Humidity: ordinary humidity 25% to 85% (RH) In case of doubt Temperature: 20C2C Humidity: 60% to 70% (RH) Atmospheric pressure: 86 kPa to 106 kPa MURATA MFG CO., LTD Spec No.: JELF243A 0091H-01 P2/9 5. Appearance and Dimensions Unit mass (typical value): 0.044 g 6. Marking No marking. 7. Electrical Performance No. Item Specification Test method 7.1 Inductance Meet chapter 3 ratings. Measuring equipment: Keysight 4192A or the equivalent Measuring frequency: 1 MHz 7.2 DC resistance Meet chapter 3 ratings. Measuring equipment: digital multimeter 7.3 Self-resonant Meet chapter 3 ratings. Measuring equipment: Keysight E4991A or the frequency equivalent 8. Mechanical Performance No. Item Specification Test method 8.1 Shear test No significant mechanical damage or no Test substrate: glass-epoxy substrate sign of electrode peeling off shall be Force application direction: observed. Applying force: 10 N Holding time: 5 s1 s 8.2 Bending test No significant mechanical damage or no Test substrate: glass-epoxy substrate (100 mm 40 sign of electrode peeling off shall be mm 1.0 mm) observed. Pressurizing speed: 0.5 mm/s Deflection: 3 mm Holding time: 5 s MURATA MFG CO., LTD