Reference Only Spec No. JELF243A-9148B-01 P1/8 CHIP COILCHIP INDUCTORSLQH3NPHMEL SPECIFICATION Murata Standard Reference SpecificationAEC-Q200 1.Scope This reference specification applies to Chip coil (Chip Inductors) LQH3NPH ME series for Automotive Electronics based on AEC-Q200. 2.Part Numbering LQ H 3N P H 1R0 M M E L Product ID Structure Dimension Applications Category Inductance Tolerance Dimension Others Packaging (LW) and Characteristics (T) L: 180Taping 3.Rating Operating Temperature Range (Ambient temperature Self-temperature rise is not included) -40 to +105C (Product temperature Self- temperature rise is included) -40 to +125C Storage Temperature Range. -40 to +125C Inductance Rated Current(mA) Self *2 Based on Temperature DC *1 Customer Murata Resonant rise ESD Toleranc Resistance (Based on 2: 2kV Part Number Part Number Frequency (H) e () *3 *4 inductance (MHz min) (%) Ambient Ambient change) temperature temperature (85) (105) LQH3NPH1R0MMEL 1.0 0.02520% 100 2350 3000 1600 LQH3NPH2R2MMEL 2.2 0.06520% 60 1800 2100 1220 LQH3NPH3R3MMEL 3.3 0.08420% 55 1520 1900 1150 LQH3NPH4R7MMEL 4.7 0.1020% 40 1300 1700 1000 LQH3NPH6R8MMEL 6.8 0.1420% 30 1040 1450 900 2 LQH3NPH100MMEL 10 0.1920% 20 810 1280 800 LQH3NPH150MMEL 15 M:20% 0.2920% 15 660 1020 620 LQH3NPH220MMEL 22 0.4020% 10 570 860 540 LQH3NPH330MMEL 33 0.5520% 8 440 760 460 LQH3NPH470MMEL 47 0.8220% 5 380 610 380 LQH3NPH560MMEL 56 500 320 1.020% 5 350 LQH3NPH680MMEL 68 470 300 1.1520% 5 310 LQH3NPH101MMEL 100 1.5920% 3 260 430 270 *1:When applied Rated current to the Products , Inductance will be within 30% of initial inductance value range. *2:Keep the temperature (ambient temperature plus self-generation of heat) under 125 . *3:When applied Rated current to the Products ,temperature rise caused by self-generated heat shall be limited to 40 max. (Ambient temperature 85). *4:When applied Rated current to the Products ,temperature rise caused by self-generated heat shall be limited to 20max. (Ambient temperature 85 to 105). 4. Testing Conditions Unless otherwise specified In case of doubt Temperature : Ordinary Temperature (15 to 35C) Temperature : 20 2C Humidity : Ordinary Humidity (25 to 85 %(RH) Humidity : 60 to 70 %(RH) Atmospheric Pressure : 86 to 106 kPa MURATA MFG.CO., LTD Reference Only Spec No. JELF243A-9148B-01 P2/8 5.Appearance and Dimensions 3.00.2 3.3.000.0.21 Unit Mass (Typical value) Unit Mass (Typical value) 0.051g 0.034g (in mm) 0.80.90.0.32 0.0.980.0.23 6.Product Marking Inductance (Three digists : 0.47H R47) 1.0H 1R0) 10H 100) 7.Electrical Performance No. Item Specification Test Method 7.1 Inductance Inductance shall meet item 3. Measuring Equipment : KEYSIGHT 4192A or equivalent Measuring Frequency: 1MHz 7.2 DC Resistance DC Resistance shall meet item 3. Measuring Equipment: Digital multi meter 7.3 Self Resonant S.R.F shall meet item 3. Measuring Equipment: KEYSIGHT E4991A or equivalent Frequency(S.R.F) 8. AEC-Q200 Requirement 8.1 Performance (based on Table 5 for Magnetics(Inductors / Transformer) AEC-Q200 Rev.D issued June. 1 2010 AEC-Q200 Murata Specification / Deviation No Stress Test Method 3 High 1000hours at 125 deg C Meet Table A after testing. Temperature Set for 24hours at room Table A Appearance No damage Exposure temperature, then measured. Inductance(at 1MHz) Within 10% DC Resistance Within 10% Change 4 Temperature Cycling1000cycles Meet Table A after testing. -40 deg C to + 125deg C Set for 24hours at room temperature,then measured. 7 Biased Humidity 1000hours at 85 deg C, 85%RHMeet Table A after testing. unpowered. 8 Operational Life Apply Rated Current 85 deg C Meet Table A after testing. 1000 hours Set for 24hours at room temperature, then measured MURATA MFG.CO., LTD 3.00.2 3.3.0000..21 1.1.4+0.190./0-.10.11 1R0