LQH43PZ221M26L Murata

Spec No.: JELF243A 9126F-01 P1/9 CHIP COILS (CHIP INDUCTORS) LQH43PZ 26 Murata Standard Reference Specification AEC-Q200 1. Scope This reference specification applies to chip coils (chip inductors) LQH43PZ 26 series for automotive electronics based on AEC-Q200 except for power trains and safeties. 2. Part Numbering (Ex.) LQ H 43 P Z 1R0 N 26 L Product ID Structure Dimension Application and Category Inductance Tolerance Dimension Packaging (L W) characteristic (T) L: taping *B: bulk *B: Bulk packing is also available. 3. Part Number and Rating Operating temperature range (ambient temperature not including self-temperature rise) -40C to +105C (product temperature including self-temperature rise) -40C to +125C Storage temperature range -40C to +125C Rated current Inductance *3 (mA) Self-resonant Based on temperature Customer Murata DC resistance ESD *2 frequency rise Nominal Based on Part number Part number () 2:2 kV Tolerance (MHz min.) value inductance Ambient Ambient (%) *1 (H) change temperature temperature 85C 105C LQH43PZ1R0N26L 1.0 N: 30 0.02620% 100 3400 3300 1410 2 LQH43PZ2R2M26L 2.2 M: 20 0.04220% 45 2300 2500 1120 2 LQH43PZ3R3M26L 3.3 M: 20 0.05220% 40 1800 2100 1000 2 LQH43PZ4R7M26L 4.7 M: 20 0.07520% 35 1400 1600 780 2 LQH43PZ6R8M26L 6.8 M: 20 0.09820% 30 1200 1400 760 2 LQH43PZ8R2M26L 8.2 M: 20 0.12820% 25 1100 1300 670 2 LQH43PZ100M26L 10 M: 20 0.14720% 20 1050 1170 620 2 LQH43PZ220M26L 22 M: 20 0.32720% 15 700 780 400 2 LQH43PZ470M26L 47 M: 20 0.71820% 8 470 520 280 2 LQH43PZ101M26L 100 M: 20 1.53820% 4 320 320 180 2 LQH43PZ151M26L 150 M: 20 2.36220% 3 280 260 140 2 LQH43PZ221M26L 220 M: 20 2.90020% 2 220 240 130 2 *1 When rated current is applied to the products, inductance will be within 30% of nominal inductance value. *2 When rated current is applied to the products, temperature rise caused by self-generated heat shall be limited to 40C max (ambient temperature 85C max). When rated current is applied to the products, temperature rise caused by self-generated heat shall be limited to 20C max (ambient temperature 85C to 105C). *3 Keep the temperature (ambient temperature plus self-generation of heat) under 125C. 4. Testing Conditions Unless otherwise specified Temperature: ordinary temperature (15C to 35C) Humidity: ordinary humidity 25% to 85% (RH) In case of doubt Temperature: 20C2C Humidity: 60% to 70% (RH) Atmospheric pressure: 86 kPa to 106 kPa MURATA MFG CO., LTD Spec No.: JELF243A 9126F-01 P2/9 5. Appearance and Dimensions Unit mass (typical value): 0.13 g 6. Marking No marking. 7. Electrical Performance No. Item Specification Test method 7.1 Inductance Meet chapter 3 ratings. Measuring equipment: Keysight 4284A or the equivalent Measuring frequency: 1 MHz 7.2 DC resistance Meet chapter 3 ratings. Measuring equipment: digital multimeter 7.3 Self-resonant Meet chapter 3 ratings. Measuring equipment: Keysight E4991A or the frequency equivalent 8. AEC-Q200 Requirement 8.1 Performance based on table 5 for magnetics (inductors/transformer) AEC-Q200 Rev. D issued June 1, 2010 AEC-Q200 Murata specification/deviation No. Stress Test method 3 High 1000 h at 125C Meet table A after testing. temperature Set for 24 h at room condition, then Table A exposure measured. Appearance No damage Inductance change (at 1 MHz) Within 10% DC resistance change Within 10% 4 Temperature 1000 cycles Meet table A after testing. cycling -40C to +125C Set for 24 h at room condition, then measured. 7 Biased humidity 1000 h at 85C, 85% (RH). Unpowered. Meet table A after testing. 8 Operational life Apply rated current 85C 1000 h Meet table A after testing. Set for 24 h at room condition, then measured. 9 External visual Visual inspection No abnormalities 10 Physical Meet chapter 5,Appearance and No defects dimension Dimension. 12 Resistance to Per MIL-STD-202 Not applicable solvents Method 215 13 Mechanical Per MIL-STD-202 Meet table A after testing. shock Method 213 100 gs/6 ms/half sine MURATA MFG CO., LTD