LQH5BPZ220MT0L Murata

Reference Only Spec No. JELF243A-9127E-01 P.1/9 CHIP COILCHIP INDUCTORSLQH5BPZT0 Murata Standard Reference SpecificationAEC-Q200 1.Scope This reference specification applies to LQH5BPZ T0 series Chip coil (Chip Inductors) for automotive Electronics based on AEC-Q200 except for Power train and Safety. 2.Part Numbering (ex) LQ H 5B P Z R47 N T0 L Product ID Structure Dimension Applications Category Inductance Tolerance Dimension Packaging (LW) and (T) L:Taping ( 180mm/reel) Characteristics K:Taping ( 330mm/reel) 3.Rating Operating Temperature Range. (Ambient temperature Self-temperature rise is not included) -40 to +105C (Product temperature Self- temperature rise is included) -40 to +125C Storage Temperature Range. -40 to +125C 3 Rated Current(A) Inductance Self 2(Based on DC ESD Customer MURATA Resonant 1 Based on Temperature rise) Resistance 5A : Part Number Part Number Frequency Inductance Ambient Ambient () 8kV Tolerance (MHz min) change (H) temperature temperature (%) 85 105 LQH5BPZR47NT0L 0.47 0.01220% 220 7.7 4.0 2.05 LQH5BPZR47NT0K LQH5BPZ1R0NT0L 1.0 0.01920% 90 5.8 3.1 1.68 LQH5BPZ1R0NT0K LQH5BPZ1R2NT0L 1.2 0.01920% 90 5.4 3.1 1.68 LQH5BPZ1R2NT0K LQH5BPZ1R5NT0L 1.5 0.02420% 70 5.0 3.0 1.63 LQH5BPZ1R5NT0K LQH5BPZ2R2NT0L 2.2 0.0N:30 3020% 55 4.0 2.6 1.37 LQH5BPZ2R2NT0K LQH5BPZ2R7NT0L 2.7 0.03520% 50 3.8 2.5 1.23 LQH5BPZ2R7NT0K 5A LQH5BPZ3R3NT0L 3.3 0.04420% 40 3.5 2.3 1.21 LQH5BPZ3R3NT0K LQH5BPZ4R7NT0L 4.7 0.05820% 40 3.0 2.0 1.09 LQH5BPZ4R7NT0K LQH5BPZ6R8NT0L 6.8 0.08320% 30 2.5 1.65 0.96 LQH5BPZ6R8NT0K LQH5BPZ100MT0L 10 0.10620% 25 2.0 1.60 0.87 LQH5BPZ100MT0K LQH5BPZ150MT0L 15 0.1M:20 8720% 18 1.6 1.20 0.62 LQH5BPZ150MT0K LQH5BPZ220MT0L 22 0.25920% 15 1.4 1.05 0.55 LQH5BPZ220MT0K 1: When applied Rated current to the Products, Inductance will be within 30% of nominal Inductance value. 2: When applied Rated current to the Products ,temperature rise caused by self-generated heat shall be limited to 40 max. 3: Keep the temperatureambient temperature plus self-generation of heat) under 125 . MURATA MFG.CO., LTD Reference Only Spec No. JELF243A-9127E-01 P.2/9 4. Testing Conditions Unless otherwise specified In case of doubt Temperature : Ordinary Temperature (15 to 35C) Temperature : 20 2C Humidity : Ordinary Humidity (25 to 85 % (RH)) Humidity : 60 to 70 % (RH) Atmospheric Pressure : 86 to 106 kPa 5.Appearance and Dimensions 5.00.2 2.00.2 0.2 5.00.2 No Marking. Unit Mass (Typical value) 0.22 5.00.2 (in mm) 1.50.2 1.50.2 6.Electrical Performance No. Item Specification Test Method 6.1 Inductance Inductance shall meet item 3. Measuring Equipment : KEYSIGHT 4284A or equivalent Measuring Frequency: 100kHz 6.2 DC Resistance DC Resistance shall meet item 3. Measuring Equipment:Digital multi meter 6.3 Self Resonant S.R.F shall meet item 3. Measuring Equipment: KEYSIGHT E4991A or equivalent Frequency(S.R.F) 7. AEC-Q200 Requirement 7.1 Performance (based on Table 5 for Magnetics(Inductors / Transformer) AEC-Q200 Rev.D issued June. 1 2010 AEC-Q200 Murata Specification / Deviation No Stress Test Method 3 High 1000hours at 105 C Meet Table A after testing. Temperature Set for 24hours at room Table A Appearance No damage Exposure temperature, then measured. Inductance change Within 10% (at 100kHz) DC Resistance change Within 10% 4 Temperature 1000cycles Meet Table A after testing. Cycling -40 C to + 125 C Set for 24hours at room temperature,then measured. 7 Biased Humidity 1000hours at 85 C, 85%RH Meet Table A after testing. unpowered. MURATA MFG.CO., LTD