LQW2BHN15NK13L Murata

Spec No.: JELF243A 0038P-01 P1/10 CHIP COILS (CHIP INDUCTORS) LQW2BHN 13 REFERENCE SPECIFICATION 1. Scope This reference specification applies to chip coils (chip inductors) LQW2BHN 13 series for general electronic equipment. 2. Part Numbering (Ex.) LQ W 2B H N 2N7 D 1 3 L Product Structure Dimension Application Category Inductance Tolerance Performance Electrode Packaging ID (L W) and specification L: taping characteristic *B: bulk *B: Bulk packing is also available (taping condition: however, products without reels are put in plastic bags). 3. Part Number and Rating Operating temperature range -40C to +85C Storage temperature range -40C to +85C Inductance DC Self-resonant Rated Customer Murata Q Nominal resistance frequency current Part number Part number (Min.) value Tolerance ( max.) (MHz min.) (mA) (nH) LQW2BHN2N7D13L 2.7 D: 0.5 nH 20 0.02 6000 1900 LQW2BHN3N1D13L 3.1 D: 0.5 nH 20 0.02 6000 1800 LQW2BHN3N3D13L 3.3 D: 0.5 nH 20 0.02 6000 1700 LQW2BHN5N6D13L 5.6 D: 0.5 nH 35 0.02 6000 1500 LQW2BHN6N8D13L 6.8 D: 0.5 nH 35 0.02 5400 1400 LQW2BHN8N6D13L 8.6 D: 0.5 nH 35 0.03 3900 1300 LQW2BHN10NJ13L 10 J: 5% 35 0.03 3300 1320 LQW2BHN12NK13L 12 K: 10% 40 0.04 3200 1100 LQW2BHN15NK13L 15 K: 10% 40 0.04 3100 1000 LQW2BHN18NK13L 18.8 K: 10% 40 0.05 2600 1000 LQW2BHN21NK13L 21 K: 10% 40 0.05 2200 950 LQW2BHN27NK13L 27 K: 10% 40 0.06 1800 900 4. Testing Conditions Unless otherwise specified Temperature: ordinary temperature (15C to 35C) Humidity: ordinary humidity 25% to 85% (RH) In case of doubt Temperature: 20C2C Humidity: 60% to 70% (RH) Atmospheric pressure: 86 kPa to 106 kPa MURATA MFG CO., LTD Spec No.: JELF243A 0038P-01 P2/10 5. Appearance and Dimensions Unit mass (typical value): 0.009 g 6. Marking No marking. 7. Electrical Performance No. Item Specification Test method 7.1 Inductance Meet chapter 3 ratings. Measuring equipment: Keysight E4991A or the equivalent Measuring frequency: L: 100 MHz Q: 250 MHz 7.2 Q Meet chapter 3 ratings. Measuring method: seeElectrical performance: Measuring method for inductance/ in the chapter 14. Appendi. 7.3 DC resistance Meet chapter 3 ratings. Measuring equipment: digital multimeter 7.4 Self-resonant Meet chapter 3 ratings. Measuring equipment: Keysight N5230A or the frequency equivalent 7.5 Rated current Product temperature rise: 20C max. Apply the rated current specified in chapter 3. Inductance change rate: within 10% 8. Mechanical Performance No. Item Specification Test method 8.1 Shear test No significant mechanical damage or no Test substrate: glass-epoxy substrate sign of electrode peeling off shall be Force application direction: observed. Applying force: 10 N Holding time: 5 s1 s MURATA MFG CO., LTD