LSM2-T/30-D12 Series www.murata-ps.com DOSA-SMT, 30A POL DC/DC Converters Typical unit FEATURES DESCRIPTION Non-isolated Point-of-Load (POL) converter, ideal Todays high performance CPU and programma- no additional external components required, for mixed voltage systems ble logic devices demand superior performance stable no-load operation, up to 10,000 F output Optimized for CPUs, DSPs and programmable logic from their power source. The LSM2-T/30-D12 load capacitance and no reverse conduction. - FPGAs, ASICs series DC/DC converters offer up to 30 Amps System functions offer a remote On/Off 30 Amps maximum output current continuous output power with a user-selectable control, two additional ground pins (optional) output of 0.8 to 3.6 Volts. 25 Amps output is and a load Sense input. These converters meet User-selectable output voltage, 0.8Vdc to 5.0Vdc via trim resistor or voltage input available up to 5.0 Vtuo . This tiny converter is agency standards UL/EN 60950-1, CAN/CSA- ideal for applications with an input range of C22.2 60950-1, IEC 60950-1, 2nd edition, and Wide input range 6Vdc to 14Vdc (Vout <3.6V) 6 to 14 Volts DC. The pinout, trim system and EN55022/CISPR22 emissions characterization. Selectable phased start-up sequencing and tracking mechanical footprint is compatible with the DOSA The automated surface mount assembly is fully Excellent efficiency over output voltage range (www.dosapower.com) industry standard. compatible with RoHS (Reduction of Hazard- Two models available, with or without additional To ensure very high performance of powered ous Substances) construction and attachment. ground/thermal pads logic systems, the LSM2-T/30-D12 features low The LSM2-T/30-D12 mounts to its host carrier Fast settling, high di/dt slew rate, low output noise output noise, high slew rates (20 Amps/Sec.), board via reflow-soldered PCB pads. fast transient response (25 Sec settling) and The extraordinary efficiency means low heat Extensive self protection plus hiccup short circuit tight line and load regulation. Many logic devices and freedom from expensive, bulky heat sinks. A auto recovery require controlled start up and tracking capabili- wealth of protection features include input under- Meets full safety and emission certification ties. The LSM2-T/30-D12 includes a Sequence/ voltage shutdown, output overcurrent current lim- Track function and prebias protection against iting, short circuit protection and overtemperature external startup voltages. Other features include shutdown/recycle. For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC LSM2 T30 D12 Series.E03 Page 1 of 12LSM2-T/30-D12 Series DOSA-SMT, 30A POL DC/DC Converters PERFORMANCE SPECIFICATIONS SUMMARY AND ORDERING GUIDE Output Input Package R/N (mVp-p) Regulation (max.) Efficiency VOUT IOUT Power VIN Nom. Range IIN (Case/ Model Family (Volts) (Amps) (Watts) Typ. Max. Line Load (Volts) (Volts) (mA/A) Min. Typ. Pinout) LSM2-T/30-D12-C 0.8-5 30 125 15 25 0.2% 0.4% 12 6-14 210/11.1 92.5% 94% C71, P72 LSM2-T/30-D12R-C To Be 0.8-5 30 125 15 25 0.2% 0.4% 12 6-14 210/11.1 92.5% 94% C71, P72 LSM2-T/30-D12R-C-CIS 0.8-5 30 125 15 25 0.2% 0.4% 12 6-14 210/11.1 92.5% 94% C71, P72 Typical Ta=+25C. under nominal line voltage and full-load conditions unless noted. Nominal Nominal line voltage, no-load/full-load conditions. output is +5 Volts. LSM2-T/30-D12 efficiencies are shown at Vout = 5 Volts. Ripple/Noise (R/N) is tested/specified over a 5 Hz to 20 MHz bandwidth and may be reduced by Iout max. is 30 Amps with Vout = 0.8 to 3.6 Volts. With Vout >3.6 Volts, Iout max. is 25 Amps. adding external filtering. R/N is shown at V out <= 2.5 Volts. If Vout >3.63V, input range is 7-14V. These devices have no minimum load requirements and will regulate under no-load conditions. LSM2-T/30-D12R-C-CIS models use a 100K resistor between the gate and source of the internal Regulation specifications describe the output voltage deviation as the line voltage or load is varied On/Off (Enable) FET controlling the PWM. from its nominal/midpoint value to either extreme. PART NUMBER STRUCTURE L SM2 - T / 30 - D12 R - C RoHS6 Hazardous Substance Compliant Output Configuration: (does not claim EU RoHS exemption 7blead in solder) L = Unipolar Low Voltage Additional Grounds: Blank = Omitted R = Installed Non-Isolated SMT Nominal Output Voltage: Input Voltage Range: 0.8-5.0 Volts D12 = 6-14 Volts (12V nominal) See note 7 above. Maximum Rated Output Current in Amps CONNECTION DIAGRAM +OUTPUT +INPUT Additional +SENSE ground/thermal * pads COMMON COMMON VCC CURRENT PWM SENSE ON/OFF CONTROLLER CONTROL REFERENCE & VTRACK/ VOUT ERROR AMP SEQUENCE TRIM INPUT Typical topology is shown. *One phase of two is shown. www.murata-ps.com/support MDC LSM2 T30 D12 Series.E03 Page 2 of 12