Recommended Alternative: MVAC250 Series PQC250 Series www.murata-ps.com 250W 3 x 5 High Density AC-DC Power Supply Converter ORDERING GUIDE Main Output Fan Output Aux Output Model Number Natural Convection Cooling Forced Air Cooling (V1) (V2) (V3) MVAC250-12F 12V 12V MVAC250-24F 24V 12V MVAC250-48F 50V 12V MVAC250-12AF 12V 12V 5V 170W 250W 250LFM MVAC250-12AFD* 12V 12V 5V MVAC250-24AFD* 24V 12V 5V MVAC250-48AFD* 50V 12V 5V MVAC250-24AFT 24V 12V 5V To Be Discontinued* *LAST TIME BUY: 4/1/2018. FEAFEATURESTURES MVAC-COVER Optional cover kit assembly see MVAC-COVER datasheet for details IEC60601 Ed.3 medical (2 x MOPP Pri-Sec) * Refer to page 2 for current sharing model number MVAC250-xxAFD notes. EN60950 ITE safety approved CCC Certifi cation is not available for these models. 250W compact high density INPUT CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units 3 x 5 standard footprint Single phase 90 115/230 264 Vac High effi ciency up to 94% Input Voltage Operating Range DC 127 300 Vdc Remote sense Input Frequency 47 50/60 63 Hz Turn-on Input Voltage Input rising 80 90 Remote On/Off, Power OK (MVAC250-xxAFx) Vac Turn-off Input Voltage Input falling 70 80 Universal AC input with active PFC Input Current 90Vac input, full load all outputs 3.4 A 7 No Load Input Power (MVAC250-xxAFD) (PS ON = OFF, 5V Aux = 0A) 1.5 2.0 W Less than 1U high 1.4 Inrush Current At 264Vac, at 25C cold start 15 Apk Convection cooled operation up to 170W Power Factor At 230Vac, full load 0.96 Isolated 12V 1A fan output OUTPUT CHARACTERISTICS Isolated 5V 2A standby/auxiliary output with Main Output Maximum Load Line, Load, Cross Typical Effi ciency models MVAC250-xxAFx Model Number Load Current Voltage (V1) Capacitance Regulation 230Vac MVAC250-12F 12V 0.4 to 20.8A 0 to 1500F 1% 93% RoHS compliant MVAC250-24F 24V 0.2 to 10.4A 0 to 300F 1% 93% Active inrush protection MVAC250-24AFT MVAC250-48F 50V 0.1 to 5.0A 0 to 82F 1% 94% Current sharing option MVAC250-12AF 12V 0 to 20.8A 0 to 1500uF 1% 93% 6 6 MVAC250-12AFD 12V 10.4A 0 to 20.8A 0 to 1500F 1.5% 93% DESCRIPTION 6 6 MVAC250-24AFD 24V 5.2A 0 to 10.4A 0 to 300F 1.5% 93% 6 6 The MVAC250 series switching power supplies MVAC250-48AFD 50V 2.5A 0 to 5.0A 0 to 68F +3.0% / 1.5% 94% utilize advanced component and circuit Main Output Characteristics (all models) technologies to deliver high effi ciency. Designed Parameter Conditions Typ. Max. Units 9 for medical, computing, communications, telecom Transient Response 50% load step, 1A/sec slew rate 5 % and other OEM applications to satisfy 1U height Settling Time to 1% of Nominal 500 sec Turn On Delay After application of input power 3 sec design considerations, the MVAC250 Series 5 Output Voltage Rise Monotonic 50 measures only 3.0 x 5.0 x 1.40 . All models msec Output Holdup 120Vac/60Hz, full load 20 offer universal AC input with active power factor Temperature Coeffi cient 0.02 %/C correction (PFC) and compliance to worldwide 1 Ripple Voltage & Noise 1 % safety and EMC standards. Compensates for up to 0.5V of lead drop with Remote Sense remote sense connected. Protected against 500 mV www.murata-ps.com/en/3d/acdc.html short circuit and reverse connection. www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html Auxiliary Output Characteristics (varies by model) www.murata-ps.com/en/3d/acdc.html Aux Output Line, Load, Cross Ripple Voltage & Auxiliary Output Load Current Load Capacitance www.murata-ps.com/en/3d/acdc.html 8 3 1 Voltage Regulation Noise www.murata-ps.com/en/3d/acdc.html Fan (V2) all models 12V 0 to 1A 0 to 220F 10% 2% Aux (V3) MVAC250-xxAFx 5V 0 to 2A 0 to 220F 5% 1% Available now at www.murata-ps.com/en/3d/acdc.html CB Test Certi cate REG.-Nr C457. and Test Report For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MVAC250.C03 Page 1 of 9MVAC250 Series 250W 3 x 5 High Density AC-DC Power Supply Converter ENVIRONMENTAL CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Storage Temperature Range -40 85 See power rating curves -10 70 C Operating Temperature Range Start up -20 Operating Humidity Non-condensing 10 95 % Operating Altitude -200 5000 m MTBF Telcordia SR-332 M1C3 25C 474K Hours Operating, MIL-HBK-810E Complies Shock Non-operating, MIL-HBK-810E Complies Operational Vibration IEC-68-2-27 standard Complies to levels of IEC721-3-2 IEC60601-1 (Ed. 3) CB Cert & Report Safety Medical Standards ANSI/AAMI ES60601-1 (2005+ C1:2005+A2:10) 2 x MOPP (Primary-Secondary) CAN/CSA 22.2 No. 60601-1 (2008) 3rd Edition EN60601-1:2006+CORR:2010 UL60950-1:, 2nd Edition, 2011-12-19 CSA22.2 No..60950-1-07, 2nd Edition, 2001-12. Safety ITE Standards EN60950-1:2006+A11:2009/A1/2010/A12:2011 IEC 60950 (ed.2), IEC60950 (ed.2) am1 CE Marking per LVD Warranty 2 years Outside Dimensions 3.0 x 5.0 x 1.4 (76.2mm x 127mm x 35.6mm) Weight MVAC250-xxF: 0.73 lbs (332.9g) MVAC250-xxAFD: 0.76 lbs (344.7g) MVAC250-xxAFT 0.78 lbs (352.7g) RESIDUAL RISK (PER ISO 14971 & IEC60601-1) FOR USER CONSIDERATION Fault Condition Residual Risk Complies Contact your Murata salesperson for details PROTECTION CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units V1 (main output) latching 110 125 % 4 Over Voltage Protection V3 (aux output: MVAC250-xxAFx) latching 5.5 7.5 V 4 Over Current Protection V1, hiccup mode 110 130 %Amax Over Temperature Protection Auto-recovery Complies Remote Sense Short Circuit Protection Complies Remote Sense Reverse Connection Protection Complies ISOLATION CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Primary to Chassis 1500 Primary to Secondary (2xMOPP) 4000 Isolation Vac Secondary to Chassis 500 Output to Output 500 MVAC250-xxAFD 300 Earth Leakage Current (under single fault condition): MVAC250-xxAF -xxAFT 300 264Vac, 60Hz, 25C MVAC250-xxF 350 A MVAC250-xxAFD 150 Earth Leakage Current (under normal conditions): MVAC250-xxAF -xxAFT 150 264Vac, 60Hz, 25C MVAC250-xxF 250 CURRENT SHARING OPTION MVAC250-xxAFD ONLY Model Number Description Main Output: Current share is achieved using the droop method. Nominal output voltage is achieved at 50% load and output voltage increases/ drops at a rate of: 48mv per amp for 12V output 192mV per amp for 24V output MVAC250-12AFD 800mV per amp for 50V output. Startup of parallel power supplies is not internally synchronized. If more than 250W combined power is needed, start-up synchronization must be MVAC250-24AFD provided by using a common PS ON signal. To account for 10% full load current sharing accuracy and the reduction in full load output voltage due to droop, available output power must be derated by 15% when units are operated in parallel. Current sharing can be achieved with or without remote sense connected to the common load. If ORing protection is desired, please contact Murata sales for external ORing FET board or external MVAC250-48AFD ORing FET reference circuit design. Aux (V3) output can be tied together for redundancy but total combined output power must not exceed 10W, external ORing devices must be used. Fan (V2) can be tied together for redundancy but total combined output power must not exceed 12W, external ORing diodes can be used. www.murata-ps.com/support MVAC250.C03 Page 2 of 9